Fujitsu PRIMERGY ServerView Suite Manual page 41

Working with the Remote Management Frontend
Power management bar
The power management bar provides information on the power status of the
managed server. You can update the display by clicking the Status button.
The Command drop-down list allows you to select and run the following IPMI
commands for power management of the managed server.
IPMI command Explanation
Power On Switches the server on.
Power Off Switches the server off.
Reset Completely restarts the server (cold start), regardless of the status of the
operating system.
Powers the server down completely and then powers it up again after
Power Cycle
approximately 5 seconds.
Graceful shutdown and power off.
Shutdown
I
You can also use the Command drop-down list to start the power
management of the managed server even if no console redirection
session is active.
ServerView Remote Management Frontend
User interfaces
41