FujiFilm FINEPIX F800EXR Owner's Manual page 90

Location Data
Q Landmark information is based on the most recently downloaded location data;
update location data (
unavailable or contain errors under some conditions, including when the camera is
held upside down. Headings rely on a magnetic compass and may not be correct if
the camera is inside a building or vehicle or close to metal objects, magnets, high-
voltage power lines, or electrical equipment.
R Use the zoom control to zoom in and out. To display additional information, press
the selector left or right to highlight landmarks and press MENU/OK. Press the selec-
tor down to choose the landmark type, or up to download location data (
Press DISP/BACK to return to playback or press the shutter button halfway to exit to
shooting mode.
R Landmarks can be added using U GEOTAGGING SET-UP > MY LANDMARK
REGISTER (P 93).
Calibration Calibration
A f icon indicates that the camera's internal sensor requires
calibration. Move the camera slowly in a large fi gure eight while
rotating your wrist as shown. If the icon does not clear from the
display, choose a diff erent location and try again.
Q To ensure that you do not drop the camera, use the strap (
72
66) before use. It is intended as a guide only and may be
P
P 1).
Smartphones and Tablet Devices
P 66).