Friedrich QUIETMASTER 2008 Service Manual page 64

WALLS: (Linear Feet)
WINDOWS & DOORS (Area, sq. ft.)
INFILTRATION - WINDOWS & DOORS: AVG.
CEILING: (Area, Sq. Ft.)
FLOOR: (Area, Sq. Ft.)
* Based on Linear Feet of outside wall
Multiply total BTU/HR/°F X 30 and plot on the graph below at 40°F. Draw a straight line from
the 70 base point thru the point plotted at 40°F. The intersection of this heat loss line with the
unit capacity line represents the winter design heating load.
62
HEATING LOAD FORM
FRIEDRICH ROOM UNIT HEAT PUMPS
2" Insulation
Average
Single Glass:
Double Glass:
Insulated (6")
Insulated (2")
Built-up Roof (2" insulated
Built-up Roof (1/2" insulated)
No Insulation
Above Vented Crawl space
Insulated (1:)
Uninsulated
* Slab on Ground
1" Perimeter insulation
BTU/HR PER
°F TEMP. DIFFERENCE
Lin. Ft. x 1.6
Lin. Ft. x 2.6
Sq. Ft. x 1.13
Sq. Ft. x 0.61
Lin. Ft. x 1.0
Loose Lin. Ft. x 2.0
Sq. Ft. x 0.07
Sq. Ft. x 0.10
Sq. Ft. x 0.10
Sq. Ft. x 0.20
Sq. Ft. x 0.33
Sq. Ft. x 0.20
Sq. Ft. x 0.50
Lin. Ft. x 1.70
Lin. Ft. x 1.00
TOTAL HEAT LOSS PER °F BTU/HR/°F
7