Installation Instructions; Installing The Base; Removing The Base - Envision EN9250 User Manual

INSTALLATION INSTRUCTIONS

INSTALLING & REMOVING THE BASE
Figure 1 - Installing the Base.

INSTALLING THE BASE

1. Set the bottom base on a flat surface.
2. Line up the front of the monitor with the front of the base and press
firmly.
Remove Pin
Figure 2 - Installing the Base.

REMOVING THE BASE

1. Never remove the base while the height adjustment lock pin is
installed. Set the monitor standing on a flat firm surface. Remove
the height adjustment lock pin.
2. Set the monitor face down on a padded flat surface. Press the four
clips inward while pushing the bottom base out.
Install
Remove Base
7