Eq (Equalizer); Mod (Modulation) - Zoom 2100 Operation Manual

6A (METAL):
Produces a contemporary heavy metal sound.
6b (STACK METAL):
Produces the powerful sound of a large, fully-driven
amplifier.
Parameter 2: Gain
Parameter 3: Tone
Type: 7 ACOUSTIC (acoustic)
This effect changes the electric guitar sound to an acoustic
guitar tone.

EQ (Equalizer)

The equalizer of the 2100 boosts and cuts the high, mid, and low ranges individually. This module is
also used to set ZNR (a patch parameter).
Parameter 1
Parameter 2
Parameter 3
Parameter 4
Parameter 1: Treble
This parameter boosts and cuts the high range. The range to
be boosted and cut when a clean-type effect is selected for

MOD (Modulation)

This modulation effect module includes chorus, pedal pitch shifter, etc.
1 : CHORUS 2 : STEREO
Parameter 1
Parameter 2
Parameter 3
Mix
Parameter 4
0 – 30
Parameter 1
Select the effect type for the MOD effect module from the
following seven types. The type of parameters 2 and 3
changes depending on the selected effect type.
Type: 1 CHORUS (chorus)
Type: 2 STEREO CHO (stereo chorus)
Type: 3 FLANGER (flanger)
Type: 4 PHASE (phaser)
Type: 5 PITCH (pitch shifter)
Type: 6 PEDAL-PITCH (pedal pitch shifter)
Type: 7 DELAY (delay)
Type: 1 CHORUS (chorus)
This monaural chorus produces a thick sound.
Treble
-12 – 12
Middle
-12 – 12
Bass
-12 – 12
ZNR (P)
oF, 1 – 10
3 : FLANGER 4 : PHASE 5 : PITCH
CHO
Depth
0 – 10
Rate
1 – 50
Mode
A0 – A9, b0 – b9 A0 – A9, b0 – b9
Parameter 2: Top
This parameter adjusts the high range, emphasizing the string
reverberation unique to acoustic guitars.
Parameter 3: Body
This parameter adjusts the low range, emphasizing the
reverberations of the guitar body.
Parameters shared by effect types 1–7
Parameter 4: Level
This parameter sets the output level of the module.
the DIST module is different from the range when a
distortion-type effect is selected.
Parameter 2: Middle
This parameter boosts and cuts the mid range.
Parameter 3: Bass
This parameter boosts and cuts the low range.
Parameter 4: ZNR (P)
This patch parameter adjusts the sensitivity of ZNR (Zoom
Noise Reduction). Try to set a higher value if possible, as
long as the tone decays naturally. If you select "oF" (off),
ZNR is disabled.
6 : PEDAL- PITCH 7 : DELAY
(RTM)
Pit
-12 – dt – 12
Mode Mix Mode
0 – 30 1 – 16
Parameter 2: Depth
This parameter sets the depth of the chorus effect.
Parameter 3: Rate
This parameter sets the modulation speed.
Parameter 4: Mix
This parameter sets the amount of the effect sound to be
mixed.
Type: 2 STEREO CHO (stereo chorus)
This stereo chorus adds spaciousness.
Parameter 2: Depth
Parameter 3: Rate
Parameter 4: Mix
Time
1 – 99,1.0 – 6.0
FB ( RTM)
0 - 10, S.o
Mix
0 – 30
17