Advertisement
Defibrillators and
Transcutaneous Pacemakers
Caution
To avoid possible damage the
Analyzer, do not discharge
defibrillator pulses into the
instrument.
Warning
To avoid injury to a patient, do not
connect the Analyzer to a patient or
equipment connected to a patient.
The Analyzer is intended for
equipment evaluation only and
should never be used in diagnostics,
treatment or in any other capacity
where the Analyzer would come in
contact with a patient.
Ventilation
Caution
To avoid heat buildup damage to the
Analyzer, do not block the ventilation
slots during use or while the
instrument is charging.
Avoiding Damage
Caution
To avoid damage to the Analyzer or
adverse affects on its performance,
do not expose the system to
temperature extremes. Ambient
temperatures should remain between
18 and 40 °C. System performance
may be adversely affected if
temperatures fluctuate above or
below this range.
Cleaning
Caution
To avoid damage to the Analyzer or
adverse affects on its performance,
clean it only by gently wiping down
with a clean, lint-free cloth dampened
with a mild detergent solution. Do
not immerse the unit.
Service and Calibration
Caution
To avoid damage to the produt or
adverse affects on its performance,
allow only qualified technical
personnel to service the Analyzer.
SigmaPace 1000
Safety Sheet
2
Advertisement
