Fluke RUSKA 7350 User Manual page 70

7350
Users Manual
If the original packing and shipping materials were retained, use them for packing the
RUSKA 7350. If the RUSKA 7350 is being packed for long-term storage (more than 30
days), place a desiccant bag inside the unit. In general, prepare the RUSKA 7350 for
shipment as follows.
1. Fluke has an RMA procedure in place. Please contact the Customer Service Center to
This information plus the RMA number must be attached to the unit when it is shipped to
Fluke Calibration. There will be a minimal charge for inspection and/or evaluation of
returned goods.
2. Enclose the RUSKA 7350 in plastic or any good water barrier material. Anti-static
3. Interior Carton (size 30 x 30 x 30 inches): Cover bottom and sides with no less than
4. The Exterior Carton must be a double wall of corrugated or fiberboard box. Use four
5. Inside the exterior carton, include the following:
6. Seal the carton, using gummed tape.
7. Address the carton to:
8. Label the carton with the following labels: THIS SIDE UP, HANDLE WITH
7-2
obtain an RMA number prior to returning any equipment to Fluke. Have the
following information available when contacting Fluke:
the part number,
the serial number,
the purchase order number,
the billing and ship to address, and
the buyer's name and telephone number.
material is advisable.
3 inches of polyfoam. Use four strips 4" to 6" wide and 50" to 60" long. Arrange
strips to cross each other inside carton. Cover sides and top, completely filling entire
carton. Tape carton closed.
3 x 3 x 84 inch strips of polyfoam crossing each other inside the carton. Place interior
carton inside, making sure exterior carton is completely filled. Do not close the
carton yet.
a. Statement of the problem or service needed. Be specific. Include the name and
telephone number of a knowledgeable technician for consultation.
b. The part number, serial number, return address, and purchase order number.
10311 WESTPARK DRIVE
CARE, DO NOT DROP, and FRAGILE.
FLUKE CALIBRATION
HOUSTON, TX 77042
USA