Sceptre X23 User Manual page 3

IMPORTANT INFORMATION
THIS PRODUCT HAS BEEN TESTED FOR COMPLIANCE WITH
REGULATORY SAFETY CERTIFICATIONS
This product is designed and manufactured to operate within defined design limits, and
misuse may result in electric shock or fire. To prevent the product from being damaged,
the following rules should be observed for the installation, use and maintenance of the
product. Read the following safety instructions before operating the display. Keep these
instructions in a safe place for future reference.
•
To avoid the risk of electric shock or component damage, switch off the power before
connecting other components to the X23 LCD TV.
•
Unplug the power cord before cleaning the X23 LCD TV. A damp cloth is sufficient for
cleaning the X23 LCD TV. Do not use a liquid or a spray cleaner for cleaning the
product. Do not use abrasive cleaners.
•
Always use the accessories recommended by the manufacturer to insure
compatibility.
•
When moving the X23 LCD TV from an area of low temperature to an area of high
temperature, condensation may form on the housing. Do not turn on the X23 LCD TV
immediately after this to avoid causing fire, electric shock or component damage.
•
Do not place the X23 LCD TV on an unstable cart, stand, or table. If the X23 LCD TV
falls, it can injure a person and cause serious damage to the appliance. Use only a
cart or stand recommended by the manufacturer or sold with the X23 LCD TV.
•
Any heat source should maintain a distance of at least 5 feet away from the X23 LCD
TV, i.e. radiator, heater, oven, amplifier etc. Do not install the product too close to
anything that produces smoke or moisture. Operating the product close to smoke or
moisture may cause fire or electric shock.
•
Slots and openings in the back and bottom of the cabinet are provided for ventilation.
To ensure reliable operation of the X23 LCD TV and to protect it from overheating, be
sure these openings are not blocked or covered. Do not place the X23 LCD TV in a
bookcase or cabinet unless proper ventilation is provided.
•
Never push any object into the ventilation slots of the X23 LCD TV. Do not place any
objects on the top of the Product. It could short circuit parts causing a fire or electric
shock. Never spill liquids on the X23 LCD TV.
•
The X23 LCD TV should be operated only from the type of power source indicated on
the label. If you are not sure of the type of power supplied to your home, consult your
dealer or local power company.
•
The power cable must be replaced when using different voltage from that specified in
the User Manual. For more information, contact your dealer.
•
The X23 LCD TV is equipped with a three-pronged grounded plug, a plug with a third
(grounding) pin. This plug will fit only into a grounded power outlet as a safety feature.
If your outlet does not accommodate the three-wire plug, have an electrician install
the correct outlet, or use an adapter to ground the appliance safely. Do not defeat the
SCEPTRE X23 HDTV User Manual
- 3 -
www.SCEPTRE.com