Audio Menu - Hitachi CP-WUX645N Operating Manual

AUDIO Menu

From the AUDIO Menu, items shown in the table below
can be performed.
Select an item using the ▲/▼ cursor buttons on the
projector or remote control, and press the ► cursor button
on the projector or remote control, or ENTER button on
the remote control to execute the item. Then perform it
according to the following table.
NOTE
• If the volume is too loud or the treble or bass are overly emphasized,
the case may vibrate or the sound may become distorted. Reduce the volume,
treble or bass to eliminate the distortion.
Item
VOLUME
TREBLE
BASS
SPEAKER
AUDIO
HDMI AUDIO
Using the ▲/▼ buttons adjusts the volume.
High ó Low
Using the ▲/▼ buttons adjusts the treble level.
High ó Low
Using the ▲/▼ buttons adjusts the bass level.
High ó Low
Using the ▲/▼ buttons turns the speaker function on/off.
TURN ON ó TURN OFF
• When the TURN ON is selected the built-in speaker works.
Allocates the audio ports.
(1) Choose a picture input port using the ▲/▼ buttons.
QUIT ó RGB1 ó RGB2 ó HDMI ó COMPONENT
AUDIO OUT STANDBY ó VIDEO ó S-VIDEO
(2) Select the audio port to be interlocked with
the input port using the ◄/► buttons.
1 ó 2 ó 3 ó 4 ó
• H is abbreviation of HDMI.
• H can be selected for HDMI port only. When H
is selected, the audio signal to HDMI port will be
output if HDMI is chosen as a display source.
• disables the audio output.
• When is selected to VIDEO, S-VIDEO or COMPONENT port,
the C.C. (Closed Caption) is automatically activated, if the C.C. is
set to AUTO in the DISPLAY Menu of the C.C. Menu and the signal
from the input port supports the C.C. feature (65).
The HDMI AUDIO is set to 1 as default. In case the HDMI audio
does not work well, try 2.
1 ó 2
Description
ó H
41
AUDIO Menu