Installing The Driver - Yamaha UX16 Owner's Manual

Installing the Driver

To operate the UX16, you need to install the driver on the computer correctly.
The USB-MIDI driver is software that transmits MIDI signals back and forth
between sequence software and the UX16 via a USB cable.
Windows 2000 users → See
Windows XP users → See
Windows Vista users → See
Mac OS X users → See
Windows users:
●
Installing the USB-MIDI Driver on a Windows 2000 Computer
Do not connect the UX16 to your computer until you are instructed to do so in the
NOTE
following procedure.
You must log into Windows as the Administrator (using the computer's administrator
NOTE
account) to install the USB-MIDI driver.
1. Insert the CD-ROM included in the package into the CD-ROM drive on your
computer.
The system displays the UX16 Driver Installation Utility panel.
If the system does not display the UX16 Driver Installation Utility panel, double-click
NOTE
"My Computer," then right-click the CD-ROM drive icon. The system displays a pop-up
menu. Select [Open] from the pop-up menu, then double-click the "Start_E.exe" file.
2. Click [Install].
3. Connect the UX16 to the computer.
The system automatically launches the Found New Hardware Wizard.
Some computers may take a while to display the Wizard window.
NOTE
Click [Next].
Computer
Sequence
software
Driver
page 8.
page 9.
page 10.
page 13.
USB cable
8
UX16