LG 60PM4M - - 60" Plasma Panel Owner's Manual page 36

External Control Device Setup
14. Balance (Command2:t)
I_ To adjust balance.
Transmission
I[k][t][ ][Set IU][ ][Uata][Cr] I
Data Mini 0 - Max: 64
• Refer to 'Real data mapping 1'. See page 35.
Acknowledgement
I[t][ ][Set IU][ ][OK][Uata][x] I
Data Min: 0 - Max: 64
* Balance : L50 - R50
15. Colour Temperature (Command2:u)
I_ To adjust colour temperature.
You can also adjust ACC in the Picture menu.
Transmission
I[k][u][ ][Set IU][ ][Uata][Cr] I
Data O: Normal 1: Cool 2: Warm 3: User
Acknowledgement
I[u][ ][Set IU][ ][OK][Uata][x] I
Data O: Normal 1: Cool 2: Warm 3: User
16. Abnormal state (Command2 : z)
I_ Abnormal State : Used to Read the power off status
when Stand-by mode.
Transmission
I[k][z][
Data
][Set ID][ ][Data][Cr] I
FF : Read
0 : Normal (Power on and signal exist)
1: No signal (Power on)
2 : Turn the monitor off by remote control
3 : Turn the monitor off by sleep time function
4 : Turn the monitor off by RS-232C function
6 : AC down
8 : Turn the monitor off by off time function
9 : Turn the monitor off by auto off function
Acknowledgement
I[z][ ][Set IU][ ][OK][Uata][x] I
17. ISM mode(Command: j p)
I_ Used to select the afterimage preventing function.
Transmission
I[j][p][ ][Set ID][ ][Data][Cr]
Data 1 :Inversion
2 : Orbiter
3 : Orb.+lnv.
4 : White Wash
8 : Normal
Acknowledgement
I[p] [ ][Set ID][ ][OK][Data][x]
36 Plasma Monitor
18. Auto Configure (Command: i u)
I_ To adjust picture position and minimize image shaking
automatically. Auto Configure only works in RGB-PC
mode.
Transmission
I[j][u][ ][Set IU][ ][Uata][Cr] I
Data 1 : To set
Acknowledgement
I[u][ ][Set IU][ ][OK][Uata][x] I
19. Key (Command: m c)
I_ To adjust Key code for IR remote control.
Transmission
I[m][c][ ][Set IU][ ][Uata][Cr] ]
Data Key code : Refer to See page 39.
Acknowledgement
I[c][ ][Set Ig][ ][OK][gata][x] ]
20. Tile Mode(Command : d d)
I_ Change a Tile Mode.
Transmission
I[d][d][ ][Set ID][ ][Data][x]
Data
O0
12
13
14
44
I
Description
Tile mode is off.
1 x 2 mode(column x row)
1 x 3 mode
1 x 4 mode
4 x 4 mode
* The data can not be set to OX or XO except 00.
Acknowledgement
I[d][ ][Set IU][ ][OK][Uata][x] ]