LG 60PM4M - - 60" Plasma Panel Owner's Manual page 25

Operation
Special Opt:ions
The monitor can be set up so that it can only be used with the remote control.
This feature can be used to prevent unauthorized viewing by disabling the front panel controls.
This Monitor is programmed to remember which option it was last set to even if you turn the monitor off.
1. Press the MENU button and then use A / • button to select the SPECIAL menu.
2. Press the IP-button and then use A / • button to select Child lock.
3. Press the IP-button and then use A / • button to select On or Off.
• When you select On, the display ' ,/_Child lock On' appears on the screen if any button
on the front panel is pressed.
4. Press the EXIT button to save the new settings.
A frozen still picture from a PC/video game displayed on the screen for prolonged periods will result in an ghost
image remaining; even when you change the image. Avoid allowing a fixed or still image to remain on the Monitor's
screen for a long period of time.
1,
2.
3.
Press the MENU button and then use A / • button to select the SPECIAL menu.
Press the IP- button and then use A / • button to select ISM Method.
Press the 1_ button and then use A / • button to select either Normal, White wash, Orbiter, Inversion or Orb.+lnv..
• Normal
If image sticking is never a problem, ISM is not necessary - set this to Normal.
• White wash
White Wash removes permanent images from the screen. Note: An excessive permanent image may be impossible to
clear completely using White Wash. To return to normal viewing, press the any button.
• Orbiter
Orbiter may help prevent ghost images. However, it is best not to allow any fixed image to remain on the screen. To
avoid a permanent image on the screen, the image will move every 2 minutes.
• Inversion
Inversion will automatically invert the plasma display panel colour every 30 minutes.
• Orb. + Inv.
May help prevent ghost images. However, it is best not to allow any fixed image to remain on the screen. To avoid a
permanent image on the screen, the screen will move every 2 minutes.
4. Press the EXIT button to save the new settings.
Owner's Manual 25