Screen Menu Options; External Control Device Setup - LG 60PM4M - - 60" Plasma Panel Owner's Manual

External Control Device Setup
01. Power (Command 2:a)
I_ To control Power On/Off of the Monitor.
Transmission
[[k][a][ ][Set IU][ ][Uata][Cr] J
Data 0 : Power Off 1 : Power On
Acknowledgement
[[a][ ][Set IU][ ][OK][Uata][x] J
I_ To show Power On/Off.
Transmission
[[k][a][ ][Set IU][ ][FF][Cr] J
Data 0 : Power Off 1 : Power On
Acknowledgement
[[a][ ][Set IU][ ][OK][Uata][x] J
* In a like manner, if other functions transmit 'FF' data
based on this format, Acknowledgement data feedback
presents status about each function.
02. Input Select (Command 2:b) (Main Picture Input)
I_ To select input source for the Monitor.
You can also select an input source using the INPUT
button on the Monitor's remote control.
Transmission
[[k][b][ ][Set IU][ ][Uata][Cr] J
Data 2 :AV 6 :RGB(DTV)
4 : Component1 7 : RGB (PC)
5 : Component2 8 : HDMI/DVI(DTV)
9 : HDMI/DVI(PC)
Acknowledqement
[[b][ ][Set ID][ ][OK][Data][x]
Data 2 :AV
4 : Component1
5 : Component2
J
6 : RGB (DTV)
7 : RGB (PC)
8 : HDMI/DVI(DTV)
9 : HDMI/DVI(PC)
03. Aspect Ratio (Command 2:c)(Main picture format)
I_ To adjust the screen format.
You can also adjust the screen format using the ARC
(Aspect Ratio Control) button on remote control or in the
Screen menu.
Transmission
[[k][c][ ][Set IU][ ][Uata][Cr] J
Data 1 : Normal screen (4:3)
2 : Wide screen (16:9)
3 : Horizon (Spectacle)
4 : Zoom1
5 : Zoom2
6 : Original
7:14:9
8 : Full (Europe version only)
9:1:1(PC)
Acknowledqement
[[c][ ][Set ID][ ][OK][Data][x] J
34 Plasma Monitor
04. Screen Mute (Command 2:d)
I_ To select screen mute on/off.
Transmission
[[k][d][ ][Set IU][ ][Uata][Cr] I
Data 0 : Screen mute off (Picture on)
1 : Screen mute on (Picture off)
Acknowledgement
[[d][ ][Set ID][ ][OK][Data][x] I
Data 0 : Screen mute off (Picture on)
1 : Screen mute on (Picture off)
05. Volume Mute (Command 2:e)
I_ To control volume mute on/off.
You can also adjust mute using the MUTE button on
remote control.
Transmission
[[k][e][ ][Set IU][ ][Uata][Cr] I
Data 0 : Volume mute on (Volume off)
1 : Volume mute off (Volume on)
Acknowledgement
[[e][ ][Set ID][ ][OK][gata][x] I
Data 0 : Volume mute on (Volume off)
1 : Volume mute off (Volume on)
06. Volume Control (Command 2:f)
I_ To adjust volume.
You can also adjust volume with the volume buttons
on remote control.
Transmission
[[k][f][ ][Set IU][ ][Uata][Cr] I
Data Min:O-Max:64
• Refer to 'Real data mapping1', See page 35.
Acknowledgement
[[f][ ][Set ID][ ][OK][Data][x] I
Data Min:O-Max:64