Lexmark MX6500e 6500e Administrator's Manual page 5

Configuring Scan to Network
Notes:
•
To use the LDAP features, the scanner must be configured to use an LDAP server. For more information, see
"Configuring LDAP" on page 11.
•
For a list of protocols used or required by the application, see the Readme file.
Network Folder settings and their descriptions
Use To
Address Type the server name or IP address of the network folder in the \\server\share format.
LDAP Path Attribute Type the path attribute for the LDAP server.
Path Suffix Type the path suffix for the LDAP server.
LDAP User ID Type the attribute for the User ID on the LDAP server. This setting will not be visible until something
Attribute is typed in the LDAP Path Attribute field.
Domain Type the Windows domain for the destination if the destination resides within a different Windows
domain than the scanner.
WINS Server Type the WINS Server address if the scanner has difficulty connecting with a network folder
destination.
Broadcast Address Type the network broadcast address if the scanner has difficulty connecting with a network folder
destination.
FTP settings and their descriptions
Use To
Address
Type the server name or IP address of the network folder in the \\server\share format.
Port Type the port number that the MFP uses to communicate with the FTP server.
LDAP Path Attribute Type the path attribute for the LDAP server.
Path Suffix Type the path suffix for the LDAP server.
LDAP User ID Type the attribute for the User ID on the LDAP server. This setting will not be visible until something
Attribute is typed in the LDAP Path Attribute field.
Authentication Options
Use
Use Kerberos authentication Use a Kerberos ticket to authenticate to network destinations.
Guest (Network
Folder)/Anonymous (FTP)
Use MFP authentication
credentials
To
Note: This option is available only if the location is set to Network Folder.
Allow the user to access the destination without prompting for authentication credentials.
Prompt the user to enter the authentication credentials set on the scanner when they access
the application from the scanner control panel. The authentication settings for the scanner
must be configured appropriately for this option to work correctly.
Note: Select this option if your scanner has been configured to use access controls and a
security template has been assigned to the "Device Apps" access control. For more
information, see the Embedded Web Server Administrator's Guide at www.lexmark.com.
5