Step 2:
If you do not create RAID, select Hard Disk Boot Priority under the Advanced BIOS Features menu.
In the Hard Disk Boot Priority submenu, select the model of the SATA hard drive onto which you wish
to install Microsoft Windows 2000/XP. You should see a screen similar to Figure 2 below.
1. SCSI-0
:
2. SCSI-1
:
3. Bootable Add-in Cards
hi: Move
PU/PD/+/-: Change Priority
I f yo u w is h to cr ea te RA ID , c on fi gu r e th e R AI D ar r ay i n R AI D BI O S (r ef e r to p a ge 6 ) f ir st . A ft er f i ni sh ed ,
re-enter the system BIOS Setup to set hard disk boot priority before OS installation. Select Hard Disk
Boot Priority under the Advanced BIOS Features menu. In the Hard Disk Boot Priority submenu,
select the RAID array onto which you wish to install Microsoft Windows 2000/XP. You should see a
screen similar to Figure 3 below.
1. SCSI-0
: 05:00-0 SiI Raid0 Set
2. Bootable Add-in Cards
hi: Move
PU/PD/+/-: Change Priority
SATA Hard Drive Configurations (Sil3132)
CMOS Setup Utility-Copyright (C) 1984-2005 Award Software
Hard Disk Boot Priority
05:00-0 ST3120026AS
05:00-1 ST3120026AS
Figure 2
CMOS Setup Utility-Copyright (C) 1984-2005 Award Software
Hard Disk Boot Priority
Figure 3
F10: Save
F10: Save
- 4 -
Item Help
}}
Menu Level
Use <h>
or <i> to
select a device, then
press <+> to move it
up, or <-> to move it
down the list. Press
<ESC> to exit this
menu.
ESC: Exit
Item Help
}}
Menu Level
Use <h> or <i> to
select a device, then
press <+> to move it
up, or <-> to move it
down the list. Press
<ESC> to exit this
menu.
ESC: Exit