Figure - Gigabyte GA-8I955X Royal Manual

Configuring sata hard drive(s) controller: silicon image sil3132
Hide thumbs Also See for GA-8I955X Royal:
Table of Contents

Advertisement

After the SATA controller driver installation is completed, you should see a screen similar to that below.
It indicates that you have installed the SATA controller driver successfully. You can proceed with the
Windows 2000/XP installation.
WindowsXP Professional Setup
The following list shows the existing partitions and
unpartitioned space on this computer.
Use the UP and DOWN ARROW keys to select an item in the list.
l
l
l
ENTER= Install
(Note: Each time you add a new hard drive to a RAID array, the RAID driver will have to be installed
under Windows once for that hard drive. After that, the driver will not have to be installed.)
SATA Hard Drive Configurations (Sil3132)
To set up Windows XP on the seleted item, press ENTER.
To create a partition in the unpartitioned space, press C.
To delete the selected partition, press D.
114471 MB Disk 0 at Id 16 on bus 0 on Si3132r5 (MBR)
Unpartitioned space
C=Create Partition
114471MB
F3=Quit

Figure 21

- 14 -

Advertisement

Table of Contents
loading

Table of Contents