Sunfire Bob carver's Ultimate receiver User Manual page 39

Speaker Position Menu
MAIN MENU
TRIMS
MODES
TONE
INPUTS
SETTINGS
Speaker Position
This menu allows you to enter the
distance from your listening position
to the various speakers. The Receiver
will then automatically adjust and
correct the speaker delay times. The
sound from each speaker should ar-
rive at the listener at the correct time.
The distance measurement is not criti-
cal, and a visual estimate is usually
adequate.
The procedure is as follows:
1. Measure or visually estimate
(in feet) how far each speaker
is away from the center listen-
ing position of your home
theater.
2. In the OSD menu, use the
remote control joystick arrow
buttons to enter the distance in
feet for each speaker.
3. The Receiver automatically
sets the appropriate delays for
each speaker, so the sounds
arrive at the listening position
at the correct time.
4. Use this table to record your
speaker distance measure-
ments.
User's Manual
SETTINGS
MAIN ZONE
ZONE 2
SPEAKERS
VIDEO
SOFTWARE
CONTROL
AMPLIFIER
SPEAKER
MAIN
CENTER
SURROUND
SURROUND BACK
SPEAKERS
SIZE
POSITION
CALIBRATION
CROSSOVER 110 HZ
SUBWFR MODE NORMAL
DISTANCE
CHAPTER 4
SPEAKER POSITION
MAIN/SIDE AXIS 10 FT
CENTER 11 FT
SURROUND 5 FT
SURROUND BACK 4 FT
39