Craftsman 917.272245 Owner's Manual
Craftsman 917.272245 Owner's Manual

Craftsman 917.272245 Owner's Manual

Lawn tractor 20.0 hp, electric start 48" mower automatic transmission

Advertisement

Owner's Manual
JCRRFTSMRN" I
LAWN TRACTOR
20.0 HP, Electric Start
48" Mower
Automatic Transmission
Model No.
917.272245
I _
This product has a low emission engine which operates d!fferently
from previously
built engines.
Before you start the engine,
read
and understand
this Owner's Manual.
CAUTION:
Read and follow all
Safety Rules and Instructions
before operating this equip-
ment.
For answers to your questions
about this product, Call:
1-800-659-5917
Sears Craftsman
Help Line
5 am - 5 pro, Mon- Sat
Sears, Roebuck and Co., Hoffman Estates, IL 60179
U.S.A.
Visit our Craftsman
website: www.sears.com/craftsman

Advertisement

Table of Contents
loading

Summary of Contents for Craftsman 917.272245

  • Page 1 Call: Read and follow all 1-800-659-5917 Safety Rules and Instructions Sears Craftsman Help Line before operating this equip- 5 am - 5 pro, Mon- Sat ment. Sears, Roebuck and Co., Hoffman Estates, IL 60179 U.S.A. Visit our Craftsman website: www.sears.com/craftsman...
  • Page 2 Sears will replace the battery at no charge. War- ranty service is available free of charge by returning your Craftsman riding equipmef to your nearest Sears Service Center. In-home warranty service is available but a tri charge will apply.
  • Page 3: General Operation

    IMPORTANT: This cutting machine is capable of amputating hands and feet and throwing, objects. Failure to observe the following safety instructions could result in serious injury or death. • Do not mow in reverse unless absolutely Look for this symbol to point out necessary.
  • Page 4 • Never carry children. They may fall off • Mow up and down slopes, not across. and be seriously injured or interfere • Remove obstacles such as rocks, tree with safe machine operation. limbs, etc. • Never allow children to operate the •...
  • Page 5 Remove obstacles such as rocks, tree • Be sure the area is clear of other ° limbs, etc. people before mowing. Stop machine if Watch for holes, ruts, or bumps. anyone enters the area. • Uneven terrain could overturn the •...
  • Page 6: Product Specifications

    Please read and retain this manual. The PRODUCT SPECIFICATIONS instructionswill enable you to assemble 3.5 Gallons 3asoline and maintain your tractor properly. Always Unleaded 3apacity observethe "SAFETY RULES". _nd Type: Regular REPAIR AGREEMENT SAE 10W30 Oil Type A Repair Agreement is available on this (above 32°F)
  • Page 7 Your new tractor has been assembled at the factory. Review the video cassette before you begin. When right or left hand is mentioned in this manual, it means, from your point of view, when you are in the operating posi- Adjustment tion (seated behind the steering wheel).
  • Page 8: Check Tire Pressure

    6. Start the engine. After engine has /CHECKLIST started, move throttle control to idle Before you operate your new tractor, we position. wish to assure that you receive the best 7. Release parking brake. performance and satisfaction from this 8. Slowly depress forward drive pedal Quality Product.
  • Page 9 These symbols may appear on your tractor or in literature supplied with the product, Learn and understand their meaning. BATTERY CAUTION REVERSE FORWARD FAST SLOW WARNING OIL PRESSURE LIGHTS ENGINE ON ENGINE OFF o%_.. PARKING BRAKE FUEL CHOKE MOWER HEIGHT UNLOCKED MOWER LIFT...
  • Page 10 KNOW YOUR TRACTOR READ THIS OWNER'S MANUAL AND SAFETY RULES BEFORE OPERATING YOUR TRACTOR Compare the illustrations with your tractor to familiarize yourself with the locations of various controls and adjustments. Save this manual for future reference. Hourmeter Light Switch Position Ignition Attachment Clutch Switch...
  • Page 11 kk" NOTE: Under certain conditions when HOW TO USE YOUR TRACTOR TO SET PARKING BRAKE tractor is standing idle with the engine Your tractor is equipped with an operator running, hot engine exhaust gases may cause "browning" of grass. To eliminate presence sensing switch.
  • Page 12 Attachment Lift These heights are approximate and may Attachment Clutch Lever High Position SwitchPull Out To vary depending upon soil conditions, height of grass and types of grass being mowed. i.'__...-Low "" Position • The average lawn should be cut to "Eng_ ,,,',,' approximately 2-1/2 inches during the...
  • Page 13: Towing Carts And Other Attach- Ments

    TOWING CARTS AND OTHER ATTACH- Never use engine or carburetor cleaner MENTS products in the fuel tank or permanent Tow only the attachments that are damage may occur. recommended by and comply with TO START ENGINE specifications of the manufacturer of your When starting the engine for the first time tractor.
  • Page 14: Automatic Transmission

    AUTOMATIC TRANSMISSION WARM UP 7. Sitting in the tractor seat, start engine. After the engine is running, move Before driving the unit in cold weather, the transmission should be warmed up as throttle control to half (1/2)speed. follows: Disengage parking brake.
  • Page 15: Maintenance

    MAINTENANCE SCHEDULE _/___/_/_,o_/_o_ AS YOU COMPLETE DATES /_/// Check Brake Operation Check Tire Pressure Check Operator Presence and Interlock Systems Check for Lense Fasteners ik_ I Lubrication Chart Check Battery Level Sharpen/Replace Mower Blades Clean Battery and Terminals Check Transaxle Cooling Check V-Belts t_ e Check Engine Oil Level...
  • Page 16 IMPORTANT: To ensure proper assembly, TRACTOR center hole in blade must align with star A_ways observe safety rules when on mandrel assembly. performing any maintenance. 4. Reassemble blade bolt tighten bolt BRAKE OPERATION securely (45-55 Ft. Lbs. torque). If tractor requires more than six (6) feet IMPORTANT: Blade bolt is grade 8 heat stopping distance at high speed in...
  • Page 17 ENGINE NOTE: The original equipment battery on your tractor is maintenance free. Do not LUBRICATION attempt to open or remove caps or covers. Only use high quality detergent oil rated Adding or checking level of electrolyte is with API service classification SF-SJ. not necessary.
  • Page 18 CLEAN AIR SCREEN Use gauge on oil fill cap/dipstick for checking level. Insert dipstick into the Air screen must be kept free of dirt and tube and rest the oil fill cap on the chaff to prevent engine damage from tube.
  • Page 19 CLEANING We do not recommend using a garden hose to clean your tractor unless the • Clean engine, battery, seat, finish, etc. electrical system, muffler, air filter and of all foreign matter. carburetor are covered to keep water out. • Keep finished surfaces and wheels free Water in engine can result in a shortened of all gasoline, oil, etc.
  • Page 20 TO LEVEL MOWER HOUSING 3. If equipped, turn height adjustment knob counterclockwise until it stops. Adjust the mower while tractor is parked on level ground or driveway. Make sure 4. Lower mower linkage with attachment lift control. tires are properly inflated (See =PROD- UCT SPECIFICATIONS"...
  • Page 21 FRONT-TO-BACK ADJUSTMENT Check adjustment on right side of tractor. IMPORTANT: Deck must be level side-to- Position any blade so the tip is pointing straight forward. Measure distance "B" at side. If the following front-to-back front and rear tip of blade adjustment is necessary, be sure to adjust...
  • Page 22 8. Remove belt from electric clutch TO REPLACE MOWER DRIVE BELT pulley. MOWER DRIVE BELT REMOVAL Remove belt from idler pulleys. 1. Park tractor on a level surface. lO.Check primary idler arm and two idlers Engage parking brake. to see that they rotate freely. 2.
  • Page 23 TO REPLACE MOWER BLADE (SEC- 10.Check secondary idler arm and idler ONDARY) DRIVE BELT pulley to see that they rotate freely. Park the tractor on level surface. Engage 11. Be sure spring is hooked in secondary parking brake. idler arm and secondary spring arm. 1, Remove mower (See "TO REMOVE INSTALL NEW MOWER BLADE MOWER"...
  • Page 24 TO ADJUST BRAKE 5. Remove belt downward from engine pulley and around electric Clutch. Your tractor is equipped with an adjust- 6. Pull belt slack toward rear of tractor. able brake system which is mounted on the side of the transaxle. Carefully remove belt upwards from transmission input pulley and over If tractor requires more than six (6) feet...
  • Page 25 2. Connect one end of the BLACK cable FRONT WHEEL TOE-IN/CAMBER to the NEGATIVE (-) terminal (C) of The front wheel toe-in and camber are fully charged battery. not adjustable on your tractor. If damage 3. Connect the other end of the BLACK has occurred to affect the front wheel toe- cable (D) to good chassis ground, in or camber, contact your nearest Sears...
  • Page 26 ENGINE TO REPLACE HEADLIGHT LAMP ACAUTION: When lit, the halogen lamps Maintenance, repair, or replacement of get extremely hot. Hold lamp assembly by the emission control devices and sys- the holder and do not touch the bulb. tems, which are being done at the 1.
  • Page 27 PRELIMINARY SETTING - TO ADJUST CHOKE CONTROL 1. Be sure you have a clean air filter, and The choke control has been preset at the the throttle control cable is adjusted factory and adjustment should not be properly (see "TO ADJUST necessary, check adjustment as de- THRO-I-I'LE CONTROL CABLE"...
  • Page 28: Engine Oil

    Immediately prepare your tractor for expedance indicates that alcohol storage at the end of the season or if the blended fuels (called gasohol or using tractor will not be used for 30 days or ethanol or methanol) can attract moisture more.
  • Page 29: Troubleshooting Chart

    TROUBLESHOOTING CHART: See appropriate section in manual unless directed to Sears service center CAUSE CORRECTION PROBLEM Will not start i 1. Out of fuel. 1. Fill fuel tank. 2. See "TO START ENGINE" 2. Engine not "CHOKED" in Operation section. properly.
  • Page 30 TROUBLESHOOTING CHART: See appropriate section in manual unless directed to Sears service center )ROBLEM CAUSE CORRECTION 3. Clean underside of mower .oss of power 3. Build-up of grass, leaves and trash under mower. 'continued) housing. 4. Dirty air filter. 4. Clean/replace air filter.
  • Page 31 TROUBLESHOOTING CHART: See appropriate seq=tion in manual unless directed to Sears service center CAUSE CORRECTION )ROBLEM Vlower blades will 2. Worn/damaged mower 2. Replace mower drive belt. drive belt. not rotate (con't) 3. Frozen idler pulley. Replace idler pulley. Frozen blade mandrel. 4.
  • Page 32: Service Note

    SERVICE NOTE...
  • Page 33 TRACTOR - - MODEL NUMBER 917.272245 SCHEMATIC °,o BATTERY FUSE STARTER AMMETER ;_42-, (OPTIONAL) ' © ', O-_I-- L ..CLUTCH / BRAKE (PEDAL UP) SEAT SWITCH (NOT OCCUPIED) ELECTRIC CLUTCH ..i 85 FUEL, OPERATOR PRESENCE RELAY #1 SPARK IGNITION UNiT BLUE!i_LINEI...
  • Page 34 TRACTOR -- MODEL NUMBER 917.272245 ELECTRICAL 16 I \_//...
  • Page 35 TRACTOR - - MODEL NUMBER 917.272245 ELECTRICAL KEY PART DESCRIPTION 163465 Battery 74760412 Bolt, Hex 1/4-20 x 3/4 7603J Tray, Battery 145211 Bolt, Btr Front 1/4-20 x 7-1/2 150109 Holddown Battery Front Mount 145769 Nut, Push Nylon Battery Front 1/4 176138 Switch Interlock Push-In 175449...
  • Page 36 TRACTOR -- MODEL NUMBER 917.272245 3HASSIS AND ENCLOSURES t_ °...
  • Page 37 TRACTOR - - MODEL NUMBER 917.272245 CHASSIS AND ENCLOSURES KEY PART DESCRIPTION 174619 Chassis 176554 Drawbar 17060612 Screw, 3/8-16 x 3/4 172542X418 Dash STD533710 Bolt RDHD SQNK 3/8-16unc x 1 174996 Panel, Dash, LH 179174X010 Panel, Dash, RH 17490608 Screw Thdrol 3/8-16 x 1/2 172540X615 Hood Assembly 126938X...
  • Page 38 TRACTOR -- MODEL NUMBER 917.272245 ":ROUNDDRIVE 26 26...
  • Page 39: Ground Drive

    TRACTOR -- MODEL NUMBER 917.272245 GROUND DRIVE KEY PART KEY PART DESCRIPTION DESCRIPTION Transaxle (See Breakdown) 123583X Key, Square 121748X Washer 25/32 x 1-5/8 x 16 Ga. Hydro gear Model 323-0510 17060512 Screw 5/16-18 x 3/4 174901X418 Console, Shift Nut Self-ThdWsh-hd 1/4 Zinc 174367 Clutch Elec 124346X...
  • Page 40: Steering Assembly

    TRACTOR - - MODEL NUMBER 917.272245 STEERING ASSEMBLY , -'7_---3e t L ..r ..÷--...
  • Page 41 TRACTOR -- MODEL NUMBER 917.272245 STEERING ASSEMBLY KEY PART DESCRIPTION 175139X418 Steering Wheel 172393 Axle Assembly 169840 Spindle Assembly, L.H. 169839 Spindle Assembly, R.H. 6266H Bearing, Race, Thrust, Hardened 121748X Washer 25/32 x 1-5/8 x 16 Gauge 12000029 Ring, Klip 175121 Draglink S'rD551137...
  • Page 42 TRACTOR - - MODEL NUMBER 917.272245 ENGINE 1117_ L-_ i_1_, OPTIONAL EQUIPMENT Spark Arrester...
  • Page 43 TRACTOR - - MODEL NUMBER 917.272245 ENGINE KEY PART DESCRIPTION 175439X505 Control, Throttle Engine, (See Breakdown) Kohler Model Number CV624-65578 149723 Muffler 146699 Pipe Exhaust Lh 146700 Pipe Exhaust Rh 171877 Bolt 5/16-18 Unc x 3/4 146629 Shield Heat 24-041-02 Gasket Kohler CV16-CV26 (See Engine Breakdown) 148456...
  • Page 44: Seat Assembly

    TRACTOR - - MODEL NUMBER 917.272245 SEAT ASSEMBLY :EY PART KEY PART DESCRIPTION DESCRIPTION 175134 Seat 72050412 Bolt, Carriage 1/4-20 x 1-1/2 140551 Bracket, Pivot, Seat 121249X Spacer, Split 71110616 Bolt 123740X Spring 19131610 Locknut, Flange 1/4 Grade 5 Washer 13/32 x 1 x 10 Gauge 123976X 145006...
  • Page 45: Wheels And Tires

    TRACTOR -- MODEL NUMBER 917.272245 DECALS PART PART DESCRIPTION DESCRIPTION 180978 177918 Decal, Hood/Seat Decal, Engine 174969 Reflector LH 149516 Decal, Battery Dngr/Psn Eng 177909 Decal, Hood, R.H. 177889 Decal, Grille 177910 174970 Reflector RH Decal, Hood, LH. 177917 177955 Decal, Engine HP LH Decal, Fender Oper Cruise 133644...
  • Page 46: Lift Assembly

    TRACTOR - - MODEL NUMBER 917.272245 LIFT ASSEMBLY...
  • Page 47 TRACTOR - - MODEL NUMBER 917.272245 LIFT ASSEMBLY PART DESCRIPTION 179504 PlungerAssembly 159476 Shaft Assembly, Lift 178981 Pin, Groove 12000002 E-Ring 19211621 Washer 21/32 x 1 x 21 Gauge 120183X Beadng, Nylon 175830 Grip, Handle, Fluted 175370 Link, Lift, LH. 175371 Link, Lift, R.H.
  • Page 48: Mower Deck

    TRACTOR - - MODEL NUMBER 917.272245 MOWER DECK >30 122, "_:,\.
  • Page 49 TRACTOR - - MODEL NUMBER 917.272245 MOWER DECK PART PART DESCRIPTION DESCRIPTION 180358 BoltRDHD SQNK 3/8-16unc x 1 Deck Weldment Mower 48 72140608 138017 Bracket Asm., Sway Bar 155986 Bar Pnt Adj. 4939M PinHead Rivet RetainerSpdng 156941 178O24 Washer 13/32 x 13/16 x 12 Ga SwayBar 19131312 174365...
  • Page 50 r'- m 130, r124 _107 6-Sealant (Joint d' etancheite) 57-20W50 Oil - 78.80Z (OZ de 78.820 d' Hulle) 127 - Seal and O-ring Kit (Phoque 0 Sonne Jeu)
  • Page 51 TRACTOR - - MODEL NUMBER 917.272245 HYDRO GEAR TRANSAXLE - - MODEL NUMBER 323-0510 PART PART DESCRIPTION DESCRIPTION Arm, Brake 170351 Main Housing, Assembly 178782 Slotted Hex Nut 5/16-24 170352 Side Housing, Assembly 170415 Cotter Pin 3/32 X 3/4 170353 Center Section, Assembly...
  • Page 52 TRACTOR -- MODEL NUMBER 917.272245 KOHLER ENGINE-MODEL NUMBER CV624 TYPE NUMBER 65578 :YLINDER HEAD, VALVE AND BREATHER Cylindre D rige Soupape et RenJflard " 35'\ _-'10 lell CRANKCASE Carter-Moteur 0--10 ts/"° 0_--8...
  • Page 53 TRACTOR -- MODEL NUMBER 917.272245 KOHLER ENGINE-MODEL NUMBER CV624 TYPE NUMBER 65578 HEADNALVE/BREATHER CRANKCASE PART PART DESCRIPTION DESCRIPTION 24-033-01-S Kit, breather cover w/gasket 24-032-01-S Seal, oil front (Includes 2-4) Crankcase 24-041-23-S Gasket, breather (USE: Miniblock 24 782 24) 24-096-59-S Cover, breather 24-294-13-S Fitting 25-139-60-S...
  • Page 54 TRACTOR -- MODEL NUMBER 917.272245 KOHLER ENGINE-MODEL NUMBER CV624 TYPE NUMBER 65578 IGNITIONIELECTRICAL I BLOWER HOUSING AND BAFFLES i 'allumaoe ou Electrlaue Habitation de souffleur et D_.alentl tl-'-| AIR INTAKE Adre Arriv6e ]...
  • Page 55 TRACTOR -- MODEL NUMBER 917.272245 KOHLER ENGINE-MODEL NUMBER CV624 TYPE NUMBER 65578 BLOWER HOUSING & BAFFLES IGNITION/CHARGING PART PART DESCRIPTION DESCRIPTION 54-755-15-S Kit, grass screen 24-027-20-S Housing, blower (Incl. 2-4) (Includes 2-4,and 24 113 Nut plastic (3) 18-S) 24-100-01-S M-403025-S Screw, hex.
  • Page 56 TRACTOR - - MODEL NUMBER 917.272245 KOHLER ENGINE-MODEL NUMBER CV624 TYPE NUMBER 65578 STARTING SYSTEM ENGINE CONTROLS D6marrant 5vstbmeJ Moteur Contr6 e t'-_. OIL PAN / LUBRICATION De L'Hulle Pan Lubrlflcatlon...
  • Page 57 TRACTOR - - MODEL NUMBER 917.272245 KOHLER ENGINE-MODEL NUMBER CV624 TYPE NUMBER 65578 OIL PAN/LUBRICATION STARTING SYSTEM PART PART DESCRIPTION DESCRIPTION Pan, oil assembly M-83g080-S Screw, hex. flange 24-199-07-S (Includes 2-10) M8x1.25x80 (2) Screw, hex. flange 25-098-08-S Starter, solenoid shift M-645025-S MTxt .0x25 (2) assembly (Includes 4-7)
  • Page 58 TRACTOR -- MODEL NUMBER 917.272245 KOHLER ENGINE-MODEL NUMBER CV624 TYPE NUMBER 65578 EXHAUST Vllebrequln CRANKSHAFT EchappementJ FUEL SYSTEM J Svst_mQI =uel...
  • Page 59 TRACTOR - - MODEL NUMBER 917.272245 KOHLER ENGINE-MODEL NUMBER CV624 TYPE NUMBER 65578 FUEL SYSTEM CRANKSHAFT PART PART DESCRIP_ON DESCRIPTION 24-853-25-S Kit, carburetor w/gaskets 24-014-42-S Crankshaft (includes 2) (Includes 2-4) 52-139-09-S Plug, cup 24-041-15-S Gasket, carburetor 24-053-25 Carburetor assembly EXHAUST (For information only not available separately) PART...
  • Page 63: Suggested Guide For Sighting Slopes For Safe Operation

    SUGGESTED GUIDE FOR SIGHTING SLOPES FOR SAFE OPERATION 1. Fold this page along dotted line indicated above. 2. Hold page before you so that its left edge is vertically parallel to a tree trunk or other upright structure. 3, Sight across the fold in the direction of hill slope you want to measure. 4, Compare the angle of the fold with the slope of the hill,...
  • Page 64 1-800-4-MY-HOME _ elec'conics, call_rthenearestSearsPartsandRepairCenter. 1-800-488-1222 For the replacement parts,accessories and owner's manuals that you need to do-it-yourself,call Sears PartsDirectS"! 1-800-366-PART 6a.m.- 11 p.m., 7days aweek (1-800-366-7278) (U.S A only) w.w_ To purchase or inquire about a Sears Service Agreement or Sears Maintenance Agreement: 1-800-827-6655 (u.sA) 1-800-361-6665 (Canada) 7 a.m.- 5 p.m., CST, Mort.- Sat...

Table of Contents