Advertisement
Available languages
Available languages
For Rinsing:
•
Slide the nozzle backward to high pressure, press
the trigger and wait for the detergent to clear.
NOTE: You can also stop detergent flow by removing
detergent siphoning tube from container.
•
Keep the spray gun a safe distance from the area
you plan to spray.
•
Apply a high pressure spray to a small area, then
check the surface for damage. If no damage is
found, it is okay to continue cleaning.
•
Start at the top of the area to be rinsed, working
down with same overlapping strokes as you used
for washing and applying detergent.
Automatic
Cool Down System
(Thermal Relief)
If you run the engine on your pressure washer for
3-5 minutes without pressing the trigger on the spray
gun, circulating water in the pump can reach
temperatures between 140-145°F. The automatic cool
down system engages at this temperature and cools
the pump by discharging the warm water onto the
ground, preventing internal pump damage.
How to Use the Hose Reel
Your pressure washer is equipped with a hose reel
that is designed to store your hose when unit is not in
use. These instructions are for short term storage
only. For long term storage see "Storage" on page 16.
After each use:
•
Disconnect hose from gun and high pressure outlet
on pump.
•
Drain water from hose.
•
Slide one end of the hose into the hole on the hose
reel. Turn the hose reel clockwise with the handle
to coil the hose onto the reel.
•
Push the other end of the hose into the clip on the
side of your unit.
IMPORTANT:
Do Not use your pressure washer with
the hose coiled onto the hose reel. The hose reel is for
storage purposes only.
10
Advertisement
