Craftsman 900.11683 Instruction Manual page 6

Finger Attachment ( Fig. 4)
The finger attachment is used for fine
detail sanding.
• Remove the screw from the base tip.
• Remove the diamond-shaped tip holder
from the sanding base.
• Fit the finger attachment onto the
sanding base.
• Fit and tighten the screw.
• Fit finger sandpaper to finger attachment.
Use only mild soap and damp cloth to
clean the toot. Never let any liquid get
inside the toot; never immerse any part of
the toot into a liquid.
IMPORTANT: To assure product SAFETY
and RELIABILITY, repairs, maintenance
and adjustment should be performed by
Sears Parts & Repair Centers.
O
Finger
Attachment
Fin( Sandpaper
Ti Holder
ACCESSORIES
Most recommended accessories for use
with your toot are available at extra cost
from your local Sears store. The hook and
loop base, base tip and finger base are
replaceable parts. If they become worn,
contact you local Sears Parts and Repair
Center.