Farenheit MD-1120CMX Owner's Manual page 9

SD/USB Functions
1. When USB or SD is inputed, the monitor will be displayed as shown below. But when
" "
you input USB that the function can not change into SD
moving). And you can select the desired menu by
remote control of monitor.
2. Use the (arrow and ENTER) buttons to select and set desired settings.
00:00 00:00 kbps
000/003
\
..
..
'
state (only the SD is
S
pressing the MODE button on the
32
Features And Controls
RETURN
Press this button to return to the root menu
SETUP
Press this button to display the Setup
menu. The Setup menu enables you
to enter the settings required for the
unit to work properly.
REPEAT
Press this button to change the playback
mode to repeat.
A-B (repeat from A to B)
Use this button to select the beginning
and end of a track which you wish to have
repeat in playback.
VOL-/+ button
Use to incease or decrease volume level.
AUDIO
Use this button to select one of the
audio soundtracks programmed on a
DVD disc. It is alse used to select the
audio output mode for the DVD
playback.
ENTER
Press this button to confirm the item
you have found and highlighted using
the arrow buttons. Usually this is done
to confirm a selection or item to be
played on the DVD.
ZOOM
If your DVD disc supports zooming in
to see the program differently, pressing
this button will enable you to change
the amount of zoom.
UP/DOWN/RIGHT/LEFT ARROWS
Use thes buttons to navigate the
various menus and screens for the
monitor and DVD systems.
PLAY/PAUSE
To start playback of a disc, press this
button. Press again to pause the
playback. If playback is paused, press
this button to resume playback.
GO TO
Use to search for a title or a chapter on
your DVD disc.
STOP
Press this button to stop the playback
of the current disc.
SKIP FORWARD/BACK
Use these buttons to skip to the next
or last track, chapter or file on the
disc in the player.
FAST FORWARD/REVERSE PLAY
Use these buttons to select either fast
forward or fast reverse playback.
9