General Setup; Tv Aspect Ratio; Angle Viewing; Osd Language - Farenheit MD-1120CMX Owner's Manual

DVD Setup

General Setup

1. TV Aspect Ratio

In the Setup function called TV Display, you set the player to output the video signal at the
same aspect ratio as your monitor. If the monitor is widescreen format, select WIDE.
" "
If it is as normal screen (4:3), choose NORMAL/PS (Pan and Scan) or NORMAL L/B
(Letterbox).
Normal / PS 4:3 PAN SCAN
Choose this setting if you want the movie to fill the entire screen.
(This might mean that the left and right edges won t be seen)
Normal / LB 4:3
Choose this setting if you want to see the movie in its original aspect ratio.
(The movie might appear with black bars at the top and bottom of the screen.)
Wide 16:9 WIDE SCREEN
Choose this setting if your DVD Player is connected to a widescreen TV.
(This opition is available only if the disc has a 16:9 display aspect ratio.)

2. Angle Viewing

Some DVD discs contain programming which allows you
to view a scene from a few different camera angles. You
can tell when a scene is so recorded when an Angle Mark
is displayed on the screen. This mark will only appear if you
have enabled the Angle Mark feature
in the DVD Setup menu.
On: When selected, the screen will be shown with
angle mark.
Off: When selected, no angle mark is shown on
the screen.

3. OSD Language

Use this option to set the OSD language.
When selected, change to set the on-screen display
language.
"
，
General Setup Page General Setup Page
TV Display TV Display PS Normal/PS
Angle Mark Angle Mark On Normal/LB
OSD Lang OSD Lang ENG Wide
Screen Saver Screen Saver On
Set TV Display Mode Set TV Display Mode
" "
General Setup Page General Setup Page
TV Display TV Display PS
Angle Mark Angle Mark On On
OSD Lang OSD Lang ENG Off
Screen Saver Screen Saver On
Set Angle Mark Set Angle Mark
General Setup Page General Setup Page
English English
TV Display TV Display PS
Angle Mark Angle Mark On Korean Korean
French French
OSD Lang OSD Lang ENG
Screen Saver Screen Saver On German German
Italian Italian
Spanish Spanish
Portuguese Portuguese
Dutch Dutch
Set OSD Language Set OSD Language
14
DVD Functions
Subtitle(SUB-T)
[DVD]
"
This button is used to select the language for the on-screen display system.
(This title menu may vary, depending on the particular DVD.)
Title
[DVD]
Used to display the title menu of the loaded DVD disc.
This function is only present on discs which support it.
Slow( )
[DVD]/[VCD]
Use this button to play a disc in slow-forward or
slow-reverse. Slow playback can be done at five
different speeds. Pressing this button repeatedly
decreases the speed in steps. Pressing a sixth
time returns playback to the normal speed.
OSD CONDITION
2X slow forward
1 / 2
4X slow forward
1 / 4
8X slow forward
1 / 8
16X slow forward
1 / 16
32X slow forward
1 / 32
1 / 2 2X slow rewind
4X slow rewind
1 / 4
8X slow rewind
1 / 8
16X slow rewind
1 / 16
32X slow rewind
1 / 32
Play
Play
27