Table of Contents
Advertisement
50
C
3: C
HAPTER
ONFIGURING THE
Viewing System
Summary
E
A
THERNET
DAPTER
Under System Summary, you can view the following information:
Table 14 System Summary Page
Property
Description
Device Name
The name assigned to the Ethernet Adapter.
You can change the default name to one of
your choice by clicking System Properties
under System Configuration.
Device Location
If you use the default device name, entering
the location is optional.
Country Code
The Country Code determines the available
channels and transmission power level
based on regulatory restrictions in the
county where the Ethernet Adapter is
installed.
Transmit Power
The level of transmission power (100%,
50%, 25%, 12%, or Min).
You can change this setting by clicking
Wireless Network under System Configuration.
MAC Address
The MAC address of the Ethernet Adapter. N/A
Serial Number
The serial number of the Ethernet Adapter. Varies
Firmware Version
The version of firmware the Ethernet
Adapter is currently using.
DHCP Client
Determines if the Ethernet Adapter obtains
its IP address from the DHCP server on the
network.
IP Address
The IP address of the Ethernet Adapter. You
can change this address by clicking IP
Network under System Configuration.
Subnet Mask
The subnet mask address of the Ethernet
Adapter. You can change this address by
clicking IP Network under System
Configuration.
Data Preamble
The data preamble setting (Short [Enhanced
performance] or Long [Wi-Fi Interoperable]).
To change this setting, click Wireless
Network under System Configuration.
System Up Time
The elapsed time since the Ethernet Adapter
booted up.
Date Manufactured
The date the Ethernet Adapter was
manufactured.
Click Refresh to update the information.
Default Value
RoamAbout
Ethernet
Adapter -
RBTSA
None
Varies
100%
N/A
On
Varies
Varies
Long
Day 0, 0:00:00
N/A
Advertisement
Table of Contents
