14
C
2: I
HAPTER
NSTALLING THE
E
A
THERNET
DAPTER
To wall-mount the Ethernet Adapter:
1 1 Place the two plastic anchors into a wall, then place two flat head
mounting screws inside the plastic anchors, as shown in Figure 4
Figure 4 Place the screw on the wall
2 Place the Ethernet Adapter onto the wall, as shown in Figure 5.
Figure 5 Place the unit onto the wall
CAUTION: Do not place the Ethernet Adapter on any type of metal
surface. Select a location that is clear of obstructions and provides good
reception.
VORSICHT: Legen Sie den Ethernet-Adapter nicht auf Metallflächen ab.
Wählen Sie einen Ort ohne Störungen und mit gutem Empfang aus.
.