Eureka 7700 Series Owner's Manual page 7

Attachment Cleaning
Note: The revolving brush roll does not stop turning when using the attachment tools. Place the handle in the
upright position. Do not place cleaner on furniture or steps as the brush roll may cause damage.
Attachment Door
The attachment door allows a quick conversion from
floor to attachment tool cleaning. The quick connect hose
has a notch in the converter that diverts the air suction
from the brush roll area to the hose and attachments.
3
Release
Button
Notch
1. Remove quick connect hose.
2. Open and hold the attachment door.
3. Push hose converter into attachment door (be sure
notch in the converter is toward back of cleaner).
To remove converter, push button on back of converter
and lift to remove. Replace hose on the back of cleaner.
(7700 Series only)
1
2
Carpet/Floor or Tools Selector
The Carpet/Floor or Tools Selector allows instant conversion
from floor to attachment tool cleaning.
1. Cleaning Carpet/Floor: Push selector switch back. This
2. Cleaning with Tools: Push selector switch forward. This
(7900 Series)
2 Tools
1
Carpet/Floor
directs the suction to the floor.
directs the suction to the hose and
tools.
7