Index Search Functions - Panasonic PV-GS50S Operating Instructions Manual

1
W.B / SHUTTER / IRIS
PUSH
MF / VOL / JOG
START/
PHOTO
DATE/
STOP
OSD TIME SHOT
COUNTER RESET TITLE ZOOM
T
MULTI/
¥ REC A.DUB
P-IN-P
1
V /REW PLAY FF/ W
W
6 1 5
STILL ADV PAUSE STILL ADV
E D
;
2
INDEX STOP INDEX
K L
∫
SELECT
VAR. P.B.
SEARCH ZOOM
STORE
MENU
OFF/ON
ITEM
P.B.DIGITAL
A
INDEX
B
S 1

Index Search Functions

To facilitate searching of desired scene, this Palmcorder
automatically records index signals during recording, as explained in
the following.
PhotoShot Index Signal
These signals are automatically recorded whenever still pictures are
taken in PhotoShot Mode (l 30).
When recording still pictures using the Continuous PhotoShot Mode
(l 30), the index signal is not recorded.
Scene Index Signal
Scene Index Signals are automatically recorded when you start
recording after inserting a Cassette.
However, if the Palmcorder is switched from the VCR Mode to
Camera Mode, or if the date and time is set before the start of
recording, the index signal is not recorded.
≥If [SCENE INDEX] of [RECORDING SETUP] Sub-Menu on the
[CAMERA FUNCTIONS] Main-Menu is set to [2HOUR], an index
signal is recorded when Recording is restarted after a lapse of
2 hours or longer. If it is set to [DAY], an index signal is recorded
when recording is restarted after the date has changed since the
last recording. (While the index signal is recorded, the [INDEX]
indication
ª PhotoShot Index Search
3
1
Set [VCR FUNCTIONS] >> [PLAYBACK FUNCTIONS]
>> [SEARCH] >> [PHOTO].
2
SET
Exit the menu by pressing the [MENU] Button.
3
Press the [9] Button or the [
Remote Controller.
≥With each press of the corresponding button, still pictures recorded
in PhotoShot Mode are searched.
≥After pictures with sounds are played back for 4 seconds, the
Palmcorder switches to the Still Playback Mode.
ª Scene Index Search
1
Set [VCR FUNCTIONS] >> [PLAYBACK FUNCTIONS]
>> [SEARCH] >> [SCENE].
2
Exit the menu by pressing the [MENU] Button.
3
Press the [9] Button or the [
Remote Controller.
≥When the corresponding button is pressed once, the [S 1]
Indication
marked with an index signal starts. Each time the button is pressed
after the start of Scene Index Search, the indication changes from
[S 2] to [S 9], and the beginning of the scene corresponding to the
selected number will be searched. After reaching the desired
scene, playback starts automatically.
≥Up to 9 scene numbers can be selected.
Top Scan
9
If the [
2 seconds, the Palmcorder will scan for scenes (or PhotoShots) and
play back the first few seconds of each. (To cancel, press the [
Button
≥For other notes, see page 88.
A
flashes for a few seconds.)
B
appears, and searching of the subsequent scene
:
] Button or the [
∫
1
or the [ ] Button
46
:
] Button on the
:
] Button on the
] Button is pressed for more than
2
.)
1
]