Asus Z9PA-D8 User Manual page 132

When prompted, use the arrow keys to select Yes from the Consistency
3.
Check? dialog box, and then press <Enter>.
Management Menu
Configure
Initialize
Objects
Rebuild
Check Consistency
Virtual Drives
Virtual Drive 0
A progress bar appears on the screen.
Management Menu
Configure
Initialize
Objects
Rebuild
Check Consistency
Virtual Drives
Virtual Drive 0
4. While checking the disk consistency, press <Esc> to display the following
options.
• Stop
• Continue - Continues the consistency check.
• Abort
5. When checking is complete, press any key to continue.
5-20
LSI Software RAID Configuration Utility Ver C.05 Sep 17, 2010
BIOS Version
LD RAID
0
SPACE-(De)Select,
LSI Software RAID Configuration Utility Ver C.05 Sep 17, 2010
BIOS Version
LD RAID
0
VD 0 Consistency Check. Press Esc to Abort.
The Data On The Drives Is Inconsistency. Repair Done!
SPACE-(De)Select,
- Stops the consistency check. This utility stores the checked
disk percentage, allowing you to resume checking the same
disk from the last percentage completed.
- Aborts the consistency check. When you resume checking,
the process will start over from the beginning.
A.10.09231523R
Virtual Drive(s) Configured
Size #Stripes
10 154494MB 4
Consistency Check?
Yes
No
Select VD
F10-Check Consistency
A.10.09231523R
Virtual Drive(s) Configured
Size #Stripes
10 154494MB 4
CC Under Process
¦ 85 % Completed
F10-Check Consistency
StripSz Status
64 KB ONLINE
StripSz Status
64 KB ONLINE
Chapter 5: RAID configuration