Table of Contents
Advertisement
2.3.2
Memory Configurations
You may install 1 GB, 2 GB, 4 GB,or 8 GB Registerd or Unbuffered with ECC/
Non-ECC DDR3 DIMMs into the DIMM sockets using the memory configurations in
this section.
•
Always install DIMMs with the same CAS latency. For optimum
compatibility, we recommend that you obtain memory modules from the
same vendor. Refer to the Qualified Vendors List on the ASUS web site.
•
You may install varying memory sizes in Channel A, Channel B and
Channel C. The system maps the total size of the lower-sized channel for
the dual-channel or triple-channel configuration. Any excess memory from
the higher-sized channel is then mapped for single-channel operation.
•
Due to the memory address limitation on 32-bit Windows OS, when you
install 4GB or more memory on the motherboard, the actual usable memory
for the OS can be about 3GB or less. For effective use of memory, we
recommend that you do any of the following:
- Use a maximum of 3GB system memory if you are using a 32-bit Windows
OS.
- Install a 64-bit Windows OS when you want to install 4GB or more on the
motherboard.
For more details, refer to the Microsoft
http://support.microsoft.com/kb/929605/en-us.
•
This motherboard does not support DIMMs made up of 256 Mb (32MB)
chips or less (Memory chip capacity counts in Megabit, 8 Megabit/Mb = 1
Megabyte/MB).
Memory population table
CPU 1 Configuration
DIMM_A2
1 DIMMs
--
2 DIMMs
--
3 DIMMs
--
4 DIMMs
6 DIMMs
CPU 2 Configuration
DIMM_D2
1 DIMMs
--
2 DIMMs
--
3 DIMMs
--
4 DIMMs
6 DIMMs
ASUS TS700-E6/RS8
DIMM_A1
DIMM_B2
--
--
--
--
DIMM_D1
DIMM_E2
--
--
--
--
®
support site at
DIMM_B1
DIMM_C2
--
--
--
--
--
DIMM_E1
DIMM_F2
--
--
--
--
--
DIMM_C1
--
--
DIMM_F1
--
--
2-9
Advertisement
Table of Contents
