Installation And Assembly - HouseWarmer HWDV080DV(N,P)-1 Installation Instructions And Owner's Manual

2
INSTALLATION OF HOUSEWARMER PRODUCT
INSTALLATION AND ANY REPAIRS TO THIS APPLIANCE MUST BE DONE BY A QUALIFIED
SERVICE PERSON.
WARNING: Read the installation instructions thoroughly before cutting or drilling any holes for
installation.
WARNING: Do not remove any rating plates attached to the unit.
A qualified service person should be called to inspect this appliance annually.
Have all of your appliances checked annually.
3
Page 16

INSTALLATION AND ASSEMBLY

SILICON-BASED
SEALANT
MOUNTING
PLATE
CAP
FLUE OUTLET
TUBE
AIR INLET
TUBE
Failure to position these parts in accordance with diagram
or failure to use only parts specifically approved with these
appliances may result in property damage or personal
injury.
CLEARANCES TO COMBUSTIBLES
Allow clearances (for all models) to adjacent combustible con-
struction.
IMPORTANT: A qualified service person must install this ap-
pliance. Installation must conform to local codes, or in the ab-
sence of local codes, with the latest edition of the National Fuel
Gas Code, ANSI Z223.1.
24632-0-0508