Century OM-117071002 Operator's Manual page 7

• ANSI StandardZ87.1 -- SAFE
PRACTICEFOR OCCUPATIONAND
EDUCATIONALEYE AND FACE
PROTECTION-- obtainablefrom the
American NationalStandards Institute,
11 West 42nd
St.,
New York, NY
10036 Telephone (212) 642-4900,
Fax (212) 398-0023 - www.ansi.org
• NFPA Standard 51B -- CUTTING
AND WELDING PROCESS --
obtainable from the National Fire
Protection Association, 1
Batterymarch Park, P.O. Box 9101,
Quincy, MA 02269-9101 Telephone
(617) 770-3000, Fax (617) 770-0700
- www.nfpa.org
• OSHA Standard 29 CFR, Part 1910,
Subpart Q., WELDING, CUTTING
AND BRAZING -- obtainable from
your state OSHA office or U. S. Dept.
of Labor OSHA, Office of Public
Affairs, Room N3647, 200 Constitution
Ave. NW Washhington, DC 20210 -
www.osha.gov
• CSA Standard W117.2 -- Code for
SAFETY IN WELDING AND
CUI-rlNG.- obtainable from
Canadian Standards Association, 178
Rexdale Blvd. Etobicoke, Ontario
M9W 1R3 - www.csa.ca
American Welding Society Standard
A6.0. WELDING AND CUI-FING
CONTAINERS WHICH HAVE HELD
COMBUSTIBLES. -- obtainable from
the American Welding Society, 550
NW Le Jeune Road, Miami, FL 33126
Telephone (800) 443-9353, Fax (305)
443-7559 - www.amweld.org or
www.aws.org
7