Table of Contents
Advertisement
Fully Automatic
Shooting
(Scene
Intelligent
Auto)
Take the picture.
® Press the shutter button completely to
take the picture.
_* The captured image will be displayed
for approx. 2 sec. on the LCD
monitor.
® If the built-in flash has popped up,
you can push it back down with your
fingers.
[_ The< _-_> mode makes the colors !eek mere impressive in nature, 0utdooi,
and sunset scenes, I[ the desired color tone is not obtained _use a Creative
Zone
m0de and se!ect a suitable Picture Sty!e (p_81)_
FAQ
iiiiiiii_iiiii
® The focus confirmation
light <0>
blinks
and focus is not
achieved.
Aim the AF point over an area having good contrast, then press the
shutter button halfway (p.40). If you are too close to the subject,
move away and try again.
® Sometimes
multiple
AF points flash simultaneously.
This indicates that focus has been achieved at all those AF points.
When the AF point covering the desired subject flashes, take the
picture.
® The beeper continues
to beep softly. (The focus confirmation
light <0>
does not light.)
It indicates that the camera is focusing continuously on a moving
subject. (The focus confirmation
light <0>
does not light.) You can
take sharp pictures of a moving subject.
® Pressing
the shutter
button
halfway does not focus the subject.
If the focus mode switch on the lens is set to <MF> (Manual Focus),
set it to <AF> (Auto Focus).
51
Advertisement
Table of Contents
