Canon RebelT3i EOS 600D Instruction Manual page 29

installing and Removing the Card
The card (sold separately) can be an SD, SDHC, or SDXC memory
card. The captured images are recorded onto the card.
Make sure the card's write-protect switch is set upward to
enable writing/erasing.
installing the card
Open the cover.
®_Slide the cover as shown by the
arrows to open it.
Write-protect switch ,_,,'_'_
Insert the card.
_ As shown by the illustration, face
the card's label side toward you
and insert it until it clicks in place.
Possible shots
Close the cover.
_ Close the cover and slide it in the
direction shown by the arrows until it
snaps shut.
_ When you set the power switch to
<ON>, the number of possible shots
(p.33) will be displayed on the LCD
monitor.
_ The number Of possible Shots depends On the remaining capacity Of the
card, image-recQrd!ng quality, !SO speed, etc,
_ Setting [_" ReJease shutter without card] to [Disable] will prevent you
from forgetting to insert a card (p.166).
29