Download Print this page

Resetting Factory Settings; Water Filter - Bosch B36IB Series Use & Care Manual

Hide thumbs Also See for B36IB Series:

Advertisement

Available languages

Available languages

Resetting
factory
settings
Recommended
after a change of
owner.
3 sec.
C3 Simultaneously
hold down the
setup and alarm
off buttons for
3 seconds.
If the factory settings are reset:
an appliance
which is switched
off switches
on,
the Super function
switches
off,
settings changed
in Setup mode
are reset to factory settings.
Water filter
To avoid serious illness or death,
do not use water that is
microbiological
or chemical
unsafe or of unknow quality
without
adequate
disinfection
or
other treatment
before or after
use of filter.
Exchanging
the filter
After installing a new water filter
always discard the ice
production
of the first 24 hours
after swichting
on the icemaker.
If ice has not been used for a
prolonged
time, discard all ice
cubes in the bin and discard the
ice production
of the next
24 hours.
If appliance
or ice was not
actively used for several weeks
or months
or ice cubes have an
unpleasant
taste or odor,
change water filter.
Air trapped
in system may cause
water and cartridge to eject.
Use caution when removing.
The filter should be changed
at
least every 6 months.
If the following
display is indicated:
To purchase
an "UttraCtarity"
replacement
water filter contact
your
local dealer or call
1-800-944-2904.
If the following display is indicated:
The filter has to be changed
immediately.
1. Rotate the filter cap on the base
panel by 90
180 ° in an
anti clockwise
direction.
2. Pull the used filter cartridge
out
of the appliance.
3. Remove the cap from the used
filter.
Take a new filter cartridge
out of the
packaging
and remove the
protective
cap.
4. Push the cap onto the new filter
cartridge.
The age of the filter is close to the
maximum
life time. Order a new
"UttraCtarity" water filter.
21

Hide quick links:

Advertisement

loading