Advertisement
2.
Paste CUS-2 and CUS-3 (DOUBLE SIDE TAPE CUSHION) and peel off separator.
Refer to SPEC of PARTS LIST for the specification of CUS-2 and CUS-3.
ATTENTION
Don'ｔ paste CUS-2 and CUS-3 on PANEL'S ACTIVE AREA.
Paste CUS-2 and CUS-3
CUS-3
Don't paste CUS-3
on ACTIVE AREA.
CUS-2
ATTENTION
Don'ｔ use the knife to cut
CUS-2 and CUS-3.
Use scissors.
832.6mm
Don't paste CUS-2
on ACTIVE AREA.
CUS-3
OK
NG
CUS-2
Page-2
ATTENTION
Criterion which pastes CUS-2 and CUS-3
is the edge of PANEL BEZEL OPENING.
8mm
40mm
Don'ｔ paste CUS-2 and CUS-3 on these area.
This note is applied for all corner.
Advertisement
