Table of Contents
Advertisement
The AHCI allows the onboard storage driver to enable advanced Serial
ATA features that increases storage performance on random
workloads by allowing the drive to internally optimize the order of
commands.
If you want the Serial ATA hard disk drives to use the Advanced Host
Controller Interface (AHCI), set this item to [AHCI]. For details on AHCI, go
to:
www.intel.com/support/chipsets/imst/sb/CS-012304.htm
www.intel.com/support/chipsets/imst/sb/CS-012305.htm
The SATA controller is set to Native mode when this item is set to [RAID]
or [AHCI].
Onboard SATA RAID ROM [Disabled]
Allows you to enable or disable the onboard SATA RAID boot ROM.
Configuration options: [Disabled] [Enabled]
The O n b o a r d S A T A R A I D R O M
C o n f i g u r e S A T A A s
C o n f i g u r e S A T A A s
C o n f i g u r e S A T A A s
C o n f i g u r e S A T A A s item to [RAID].
C o n f i g u r e S A T A A s
Legacy IDE Channels [SATA Pri, PATA Sec]
Allows you to set Serial ATA, Parallel ATA, or both, to legacy mode.
Configuration options:
• [SATA Only] - SATA1, SATA2, SATA3, and SATA4 ports are available
• [PATA Pri, SATA Sec] - PATA, SATA2, and SATA4 ports are available
• [SATA Pri, PATA Sec] - SATA1, SATA3, and PATA ports are available
• [PATA Only] - Only PATA ports are available
The L e g a c y I D E C h a n n e l s
A T A
A T A
A T A/ / / / / IDE Configuration
A T A
A T A
IDE Detect Time Out (Sec) [35]
IDE Detect Time Out (Sec) [35]
IDE Detect Time Out (Sec) [35]
IDE Detect Time Out (Sec) [35]
IDE Detect Time Out (Sec) [35]
Selects the time our value (in seconds) for detecting ATA/ATAPI devices.
Configuration options: [0] [5] [10] [15] [20] [25] [30] [35]
5 - 1 6
5 - 1 6
5 - 1 6
5 - 1 6
5 - 1 6
O n b o a r d S A T A R A I D R O M item appears only when you set the
O n b o a r d S A T A R A I D R O M
O n b o a r d S A T A R A I D R O M
O n b o a r d S A T A R A I D R O M
L e g a c y I D E C h a n n e l s option appears only when you set the
L e g a c y I D E C h a n n e l s
L e g a c y I D E C h a n n e l s
L e g a c y I D E C h a n n e l s
IDE Configuration
IDE Configuration
IDE Configuration item to [Compatible] mode.
IDE Configuration
C h a p t e r 5 : B I O S s e t u p
C h a p t e r 5 : B I O S s e t u p
C h a p t e r 5 : B I O S s e t u p
C h a p t e r 5 : B I O S s e t u p
C h a p t e r 5 : B I O S s e t u p
Advertisement
Table of Contents
