Table of Contents
Advertisement
5.6.2 Broadcom Gigabit LAN Driver Installation
You can find the Broadcom Gigabit Network driver for SCO OpenServer
5.0.6a in the ASUS Support CD at \Drivers\Lan\Broadcom\SCO\OpenSrv\
Creating a Diskette
1. Copy the file VOL.000.000 to an SCO system. The file is located in
"\drivers\lan\broadcom\sco\opensrv" of the ASUS Support CD.
2. Create a diskette using: dd if =VOL.000.000 of=/dev/rfd0135ds18.
Installing the Driver
1. Use custom or scoadmin software to install the SCO OpenServer
driver from the media image or from the floppy created above.
2. After the package is installed, use netconfig to add the new network
adapter.
3. Once added, modify the hardware configuration in Advanced Options
to change the Line Speed and Flow Control if desired. The settings for
these parameters are listed below:
Line Speed
•
AutoNegotiate (default) (all speeds advertised)
•
Fixed HalfDuplex10
•
Auto HalfDuplex10 (only 10 Mbps half duplex advertised)
•
Fixed FullDuplex10
•
Auto FullDuplex10 (only 10 Mbps full duplex advertised)
•
Fixed HalfDuplex100
•
Auto HalfDuplex100 (only 100 Mbps half duplex advertised)
•
Fixed FullDuplex100
•
Auto FullDuplex100 (only 100 Mbps full duplex advertised)
•
Auto HalfDuplex1000 (only 1000 Mbps half duplex advertised)
•
Fixed FullDuplex1000 (Note 1)
•
Auto FullDuplex1000 (only 1000 Mbps full duplex advertised)
NOTE: 1000 Mbps (1 Gbps) full duplex fixed speed is only valid for
fiber connections. For copper, twisted-pair connections, 1 Gbps can
only be set through autonegotiation with a 1 Gbps partner.
Intel Gigabit LAN does not support SCO UNIX 5.0.6a because Intel did not
release the driver.
ASUS PRL-DLS533 motherboard user guide
NT4
W2K
WXP
NNW
SCO
UNX
LNX
5-49
Advertisement
Table of Contents
