Amx D.d; Network Factory Default - Sanyo PLC-WL2503A Owner's Manual
Network set-up and operation
Hide thumbs
Also See for PLC-WL2503A:
- Owner's manual (78 pages) ,
- Specifications (1 page) ,
- Service manual (104 pages)
Table of Contents
Advertisement
Network factory default
AMX D.D.
Choose "AMX D.D." in the Network menu and press SELECT button, select ON or OFF to allow the
projector to be detected by AMX Device Discovery.
For more details, visit http://www.amx.com/.
Network factory default
1. Select "Network factory default" in the Network menu and press SELECT button.
2. A confirmation box appears and select "Yes" and then press SELECT button.
3. Another confirmation box appears and select "Yes" and then press SELECT button.
4. All the wired LAN settings will go back to the factory default settings. For details, refer to
"Wired LAN factory default settings" (p.16).
"Crestron control" (pp.24-25) settings also will go back to the factory default settings.
*
15
Advertisement
Table of Contents
