Safety And International Symbols - Bolens BL410 Operator's Manual

RULESFOR SAFE OPERATION
SAFETY AND INTERNATIONAL SYMBOLS
Th s operator's manua descr bes safety and internat ona symbo s and pictographs that may appear on th s product
Read the operator!s manual for complete safety, assembly, operating and maintenance and repair information.
SYMBOL MEANING SYMBOL MEANING
• SAFETY ALERT SYMBOL i
Indicatesdanger, warning or caution.
May be used in conjunction with other
symbols or pictographs.
• ON/OFF STOP CONTROL
ON I STARTI RUN
WARNING - READ
OPERATOR'S MANUAL
Read the operator's manual(s) and follow
all warnings and safety instructions.
Failure to do so can result in serious
injury to the operator and/or bystanders.
WEAR EYE AND HEARING
PROTECTION
WARNING: Thrown objects and loud
noise can cause severe eye injury and
hearing loss. Wear eye protection
meeting ANSI Z87.1 standards and ear
protection when operating this unit. Use
a full face shield when needed.
• KEEP BYSTANDERS AWAY
WARNING: Keep all bystanders,
especially children and pets, at least 50
feet (15 m) from the operating area.
• UNLEADED FUEL
Always use clean, fresh unleaded fuel.
O
• ON/OFF STOP CONTROL
OFFor STOP
• HOT SURFACE WARNING
Do not touch a hot muffler, gear housing
or cylinder. You may get burned. These
parts get extremely hot from operation.
They remain hot for a short time after the
unit is turned off.
• CHOKE CONTROL
A • FULL choke position.
B • PARTIAL choke position.
C • RUN position.
• GARDEN CULTIVATORS - ROTATING
TINES CAN CAUSE SEVERE INJURY
WARNING: Stop the engine and allow
the tines to stop before installing or
removing tines, or before cleaning or
performing any maintenance. Keep
hands and feet away from rotating tines.
• OIL
Refer to operator's manual for the proper
type of oil.
• THROWN OBJECTS AND ROTATING
CUTTER CAN CAUSE SEVERE
INJURY
WARNING: Do not operate without the
proper attachments and guards in place.
Keep away from the rotating tines.
• NO STEP
Always keep proper footing and balance,
Do not overreach, take extra care when
working on steep slopes or inclines,
• PLACELEFTFOOTHERE
Avoid accidental starting. Stand in the
starting position whenever pulling the
starter rope. The operator and unit must
be in a stable position while starting.
5 x