Advertisement
SETTING THE TIME
OF DAY
The dial rotates clockwise and makes
one complete revolution every 24
hours. To set the correct time turn
the dial clockwise by hand (using the
levers on the clock face) until the
correct time of day is against the line
marked TIME. (See diagram opposite)
SETTING THE ON/OFF TIMES
The four setting tappets, coloured red and blue, are moved around the circumference of the dial to
set your required ON and OFF times.
These tappets work in pairs to switch the
system ON and OFF.
- No 1 (red) 1st ON and No 2 (blue) 1st OFF
- No 3 (red) 2nd ON and No 4 (blue) 2nd OFF
The tappets may be moved in either direction.
(See diagram)
Please ensure that you press and hold down
any tappet that is too be moved, release
tappet only once correct time position has
been reached.
Tappets cannot be moved across the Time line.
The position of the dial may have to be altered
to set the initial ON/OFF time.
Please ensure the clock is set to the correct current time after altering the ON/OFF settings.
LIGHTLY PRESS
DOWN ON
No 1 TAPPET.
MOVE TAPPET
UNTIL REACHING
THE DESIRED
ON TIME
3
LIGHTLY PRESS
DOWN ON
No 2 TAPPET.
MOVE TAPPET
UNTIL REACHING
THE DESIRED
OFF TIME
REPEAT PREVIOUS
INSTRUCTIONS
FOR 2nd
ON/OFF
SETTINGS.
USING TAPPETS
3 AND 4
MOVE THE
PROGRAMME
SELECTION SWITCH
TO THE REQUIRED
POSITION ON
EITHER HW
AND/OR CH
Hide quick links:
Advertisement
