[3D Eyewear Brightness]; [3D Ir Transmitter] - Panasonic PT-AE7000U Operating Instructions Manual

[3D EYEWEAR BRIGHTNESS]

This enables adjusting the brightness for the 3D
Eyewear.
Switch settings
[LIGHT]
[NORMAL]
[LIGHT] Select to brighten the 3D video display.
[NORMAL] Select this as standard for 3D viewing
[DARK] Select to reduce 3D video afterimage.
Note
When you switch the brightness of 3D Eyewear, the
z
screen may momentarily appear jumbled.

[3D IR TRANSMITTER]

This controls the 3D IR Transmitter embedded in this
projector.
Switch settings Switch settings
[DARK]
[STRONG]
[MEDIUM]
Note
z
z
[3D SETTINGS] menu
[OFF]
[STRONG]
This sets the IR output of the 3D IR
Transmitter to high.
Select this when viewing 3D video.
This sets the IR output of the 3D IR
Transmitter to middle. Select this when
the response of the remote control of
the projector or the external device is
poor.
This sets the IR output of the 3D IR
Transmitter to low.
[WEAK] Select this when the response of the
remote control is poor even when set
to [MEDIUM].
This sets the IR output of the 3D IR
[OFF]
Transmitter to off.
Select this when not viewing 3D video.
If you feel that the response of the remote control for
this projector or external devices is poor when using the
built-in 3D IR Transmitter, first set to [MEDIUM]. If no
improvements are seen, set to [WEAK].
This menu cannot be used to control the external 3D IR
transmitter (optional accessory).
Switch settings
[WEAK]
[MEDIUM]
ENGLISH - 67