Table of Contents
Advertisement
Setting up
Connecting your devices
Be sure to read the manuals for devices before connecting them to the projector.
Make sure that all the devices are suitable to be connected with this product, and
prepare the cables required to connect. Please refer to the following illustrations
to connect them. To input component video signal to COMPUTER IN port, please
see the description of the COMPUTER IN item of the INPUT menu (36).
HDMI
WARNING
►Be careful not to damage the cables, and do not use damaged cables.
CAUTION
connecting them to projector. Connecting a live device to the projector may
generate extremely loud noises or other abnormalities that may result in
malfunction or damage to the device and the projector.
►Use appropriate accessory or designated cables. Ask your dealer about non-
accessory cables which may be required a specific length or a ferrite core by
the regulations. For cables with a core only at one end, connect the end with
the core to the projector.
►Make sure that devices are connected to the correct ports. An incorrect
connection may result in malfunction or damage to the device and the projector.
NOTICE ►Use the cables with straight plugs, not L-shaped ones, as the
input ports of the projector are recessed.
10
Monitor
RGB IN
L
R
L
VIDEO OUT
S-VIDEO OUT
AUDIO OUT
AUDIO OUT
VCR/DVD/Blu-ray Disc player
►Do not disassemble or modify the projector and accessories.
►Turn off all devices and unplug their power cords prior to
PC
AUDIO OUT
RGB OUT
AUDIO OUT
Y
C
/P
C
/P
R
L
R
B
B
R
R
AUDIO OUT
COMPONENT VIDEO OUT
RS-232C
L
R
AUDIO IN
Speakers
(with an
amplifier)
Advertisement
Table of Contents
