Part Settings; Selecting A Recording Part; Selecting A Voice; Part Volume - Yamaha PSR-S650 Reference Manual

Part Settings

Selecting a Recording Part

1
Press the CATEGORY [<]/[>] buttons repeatedly until "Part"
appears in the display.
2
Rotate the dial and select a recording Part.
Range: RHYTHM 1–2, BASS, CHORD 1–2, PAD, PHRASE 1–2
3
Press the [EXECUTE] button to set the Part.
The button corresponding to the Part to be recorded lights in red.

Selecting a Voice

1
Press the CATEGORY [<]/[>] buttons repeatedly until "Voice"
appears in the display.
2
Press a desired VOICE Category button to select the Voice cate-
gory.
3
Rotate the dial to select a Voice.
Range: When RHY 1 is selected as the Part, all Voices can be selected.
When RHY 2 is selected as the Part, drum Voices can be selected.
When other Part is selected, all Voices excepting drums can be
selected.

Part Volume

1
Press the CATEGORY [<]/[>] buttons repeatedly until "Part Vol-
ume" appears in the display.
2
Rotate the dial and set the Part Volume.
Range: 0–127

Pan

1
Press the CATEGORY [<]/[>] buttons repeatedly until "Pan"
appears in the display.
2
Rotate the dial and set the Pan position.
Range: 0–64–127

Reverb Level

1
Press the CATEGORY [<]/[>] buttons repeatedly until "Reverb
Level" appears in the display.
2
Rotate the dial and set the Reverb depth.
Range: 0–127

Chorus Level

1
Press the CATEGORY [<]/[>] buttons repeatedly until "Chorus
Level" appears in the display.
2
Rotate the dial and set the Chorus depth.
Range: 0–127
Creating Original Styles (Style Creator)
NOTE
• You can also select a part by
pressing the Part button
([RHY 1]–[PHR 2]) while
holding the [REC] button.
Reference Manual
37