Connecting A Usb Flash Memory - Yamaha PSR-I455 Owner's Manual

USB Flash Memory Operations

Connecting a USB Flash Memory

1
Connect a USB flash memory to the
USB TO DEVICE terminal, being careful
to insert it with the proper orientation.
2
Wait until "USB" appears on the left cor-
ner of the display.
The "USB" indication confirms that the connected
USB flash memory has been mounted or recog-
nized.
3
Hold down the [FILE CONTROL] button
to call up the File Control display.
Hold for longer
than a second.
 If "UnFormat" followed by "Format?"
appears:
This indicates that the connected USB flash
memory has not been formatted, and cannot be
mounted or recognized. Execute the Format
operation by following the instructions starting
with Step 2 on page 53.
52
PSR-I455 Owner's Manual
Harmnum1
Load STY
4
Rotate the dial to call up the desired File
Control function, then execute it.
For details, refer to the table below.
Display File Control function
Load STY Loading a Style File
Loading User Data from a
Load USR
USB Flash Memory
Saving a User Song as SMF
Save SMF
to a USB Flash Memory
Saving User Data to a USB
Save USR
Flash Memory
Deleting a SMF File in a USB
Del SMF
Flash Memory
Deleting a User File in a USB
Del USR
Flash Memory
Formatting a USB Flash
Format?
Memory
Exiting from a File Control
Exit?
display
Messages may appear on the display during
File Control procedures to aid in smooth oper-
ation. Refer to the Message List on page 59
for details.
NOTE
• No sound will be produced if the keyboard is played
while the file control display is showing, and only buttons
related to File Control operations will be active.
NOTE
The File Control display cannot be called up in the follow-
ing situations.
• During playback of Style, Tabla/Tanpura, or Song
• When "USB" does not appear even if you have con-
nected a USB flash memory to the [USB TO DEVICE]
terminal.
Page
57
56
55
54
58
58
53
59