Saving And Loading Data; Connecting A Usb Flash Memory - Yamaha YPG635MM Owner's Manual

Saving and Loading Data

USB flash memory is a memory medium used for storing data.
When a USB flash memory is inserted in this instrument's USB TO DEVICE terminal,
registered settings can be saved from or loaded into the instrument. USB flash mem-
ory can also be used to transfer Song, Style, and Music Database files to the instru-
ment, where they can be selected and used in the same way as the internal data.
In this section we'll look at the procedures for setting up and formatting USB flash
memory devices, as well as for saving and loading data to and from them.
Before using a USB device, read through the "Precautions when using the USB TO
DEVICE terminal" section on page 97.

Connecting a USB Flash Memory

1
Connect a USB flash memory to the
USB TO DEVICE terminal, being careful
to insert it with the proper orientation.
A message (information or confirmation dialog)
sometimes appears on the display to facilitate
operation. Refer to the "Messages" on page 120
for an explanation of each message.
96
DGX-630/YPG-635 Owner's Manual
2
Check that the file control icon is shown
in the MAIN display.
You can go to the FILE CONTROL display
from which you can access file operations by
pressing the [MENU] button from this display.
(Do not press this button now, but only when
instructed to in the sections below.)
Menu
Format
User File Save
User Song Save
Load
USB Delete
User Delete
NOTE
• No sound will be produced if you play the keyboard while the FILE
CONTROL display is showing. Also, in this state only buttons related
to file functions will be active.
NOTE
• The FILE CONTROL display will not appear in any of the following
cases:
• During style or song playback.
• During a lesson.
• While data is being loaded from a USB flash memory.
Appears while the
memory device is
being mounted.
File Control Icon
Reference Page
98
99
100
101
102
103