Driver Installation; Software Package - Emprex USB 2.0 External Drive User Manual

Note:
♦
Be sure to use the USB 2.0 cable packed with the drive.
♦
Never plug or unplug in any other USB device while the drive is
transferring data. It's likely to loss data.
♦
It's advisable not to disconnect the drive or unplug the power to
the drive while the application disc is inserted.
♦
Don't connect more than two CD-RW drives of USB connection to
a single computer.

Driver Installation

Windows Environment
This DVD±R/RW Writer is a PnP (Plug and Play) device, and Windows
ME/2000/XP can automatically detect the drive and load the appropriate
driver. For the users who run Windows 98SE, please install the driver in
the disc 2 via below path: D: \USB2.0\ External Driver\Set up," where D is
your drive letter, and then restart the computer.

Software Package

The bundled package combines software for 1) DVD/CD recording 2)
DVDs/VCDs authoring 3) Packet Writing 4) DVD playback, which gives
you the complete solution for making audio/data CDs/DVDs of different
formats, editing video and authoring DVD movies. The user-friendly
interface simplifies the recording process and guides you through the
creation in an easy and innovative way. No matter you are a novice or an
experienced user; this is your best recording tools with the writer.
Installation under Windows Environment
1. Insert the application disc and the installation program will run
automatically. Then follow the on-screen procedures.
Or
2. Run: \setup.exe on the application disc.
5