Installation; Hardware Installation - Emprex USB 2.0 External Drive User Manual

INSTALLATION

Hardware Installation

1. Plug the power cable into the
power outlet and the back of
your external USB 2.0 drive
separately.
2. Connect the USB cable to the
USB port on your controller or
your computer's USB port.
3. Then connect the other end of
the USB cable to the back of
your external USB 2.0 drive.
4. Power ON the drive by pressing
the power switch on the back.
5. Windows will detect your new
external USB 2.0 drive and
assign it a new drive letter.
4