Firsttime Setup - Panasonic VIERA TC-L3232C Owner's Manual

First Time Setup
First time setup screen is displayed only when the TV is turned on for the first time after the power cord is
inserted into a wall outlet and when "Auto power on" (p. 34) is set to "No".
Turn the TV On with the POWER button
(TV) (Remote)
POWER
or
Configure your viewing mode
d_ Select your language
)select
@OK
(2)Select your viewing mode (Be sure to select "Home use")
)select
@OK
÷ Please confirm your selection (Home Use) before pressing OK button.
• If you select "Store Demonstration" by mistake in _2),
confirmation screen will be displayed.
)select
@OK
® Select "No" and return to previous screen (2].
® If you select "Yes", Screen enters the store demonstration mode.
To display the "Set viewing mode" screen again as shown above and select
"Home Use", do one of the following:
• Press and hold down the side POWER button for at least five seconds.
• Unplug power cord for 30 seconds and plug it again.
® If you use any other step other than _ then turn the TV off, or if you used the EXIT
button to quit before completing the settings, the next time you turn the TV on, "First
time setup" will not be automatically displayed.
• The settings up to that point are saved.
• You can start "First time setup" at any time. (p. 34)
® Language, ANT/Cable setup, Input labels, Clock can also be changed from the
Settings Menu. (p. 34)
12
tc_L3232c_en_O608.indb 12 2010/12/24 13:40:0!
I