Watching Tv - Panasonic VIERA TC-L3232C Owner's Manual

Watching TV
Turn power on
(Remote) (TV)
POWER
or
INPUT
® Please select correct input --> _ (p. 19)
Select a channel number
m_m
or _[_m
• Also available side CH button on the unit.
[For CablelSatellite box connection]
- Use your connected box s remote contro.
• To directly enter the digital channel
number
When tuning to a digital channel,
press the button to enter the minor
number in a compound channel
number.
example: CH15-1: _ _ _
® Reselect "Cable" or "Antenna" in "ANT in" of "ANT/Cable setup" to switch the signal
reception between cable TV and antenna. (p. 13, 28)
® The channel number and volume level remain the same even after the TV is turned
off.
• Other Useful Functions
• Select the Audio mode for watching TV
SAP Digital mode
Press SAP to select next Audio track (if available)when receiving a digital channel.
Analog mode
Press SAP to select the desired Audio mode.
• Each press of SAP will change the Audio mode. (Stereo/SAP/Mono)
® SAP is not available when watching TV with a Cable or Satellite box connected via HDMI.
® Contact your Cable or Satellite operator for instructions on enabling SAP with their box.
• Switches the Closed Caption mode On or Off
cc _ ==_ _ ==_ _
q
® Closed Caption is not available when watching TV with a Cable or Satellite box connected via HDMI.
® Contact your Cable or Satellite operator for instructions on enabling CC with their box.
• Displays and removes information. When watching programming via the Antenna/Cable input,
shows the channel banner.
INF0 Channel Clock
Station Signal Picture imer
identifier resolution mode remaining time
Closed caption Rating Level Aspect ratio
I
15
tc_L3232c_en_O608Jndb 15 2010/12/24 13:40:1;
I