Panasonic VIERA TC-L32X30 Owner's Manual page 62

How do I get EASY IPTV to work
on my TV?
How do I check for the latest
software (firmware) version for
my TV?
Can I use any USB WiFi adapter
to connect the TV to my
wireless network?
How do I reset my TV to all
factory defaults and settings?
1_i You need a broadband (high speed) Internet service with a "_
speed of no less than 1.5 Mbps (p. 39).
2. Connect the TV to the Internet through your router by an
Ethernet cable or a compatible Panasonic USB wireless
adapter.
3. Run the "Connections under the Network
Test", Settings
menu.
If Connection test fails, then check with your Internet
service provider or router/modem manufacturer if there are
firewall, content filter or proxy settings that may block the
_, TV from accessin
/_]nthe_mainmenul S_elect"Setup". Highhght "Networ
/ Settings" and press OK. Select "Software Update". The
/ current version and latest version software will be shown. If
_ software update is "grayed out", the TV is not connected to
_/ the Internet. If newer version is available, update your TV.
/ Follow the on-screen instructions, do not power off the TV
/ until the update is complete. Be patient; firmware update
/ may take a while.
The TV's internal software was designed to work with
Panasonic's wireless adapter model DY-WL10*. Check
www.panasonic.com/NetConnect for updated information.
In the main menu, select "Setup". Highlight "Reset to
Defaults" and press OK. Enter your password (if created
earlier) or create a temporary new password. Select Yes to
reset the TV.
* Model number is subject to change without notice.
62
tc_L32_x30_eng Oa92.indb 62 2011/01/05 11:22:41
I