Panasonic VIERA TC-L32X30 Owner's Manual page 42

Before using a Network camera, you need to register the camera as shown below. You can also set
Default camera or Disconnect/Delete the registered cameras.
Press "Network cameras list" and
display screen
Set Network camera setting
R
Start camera search.
@ Before you start to search for a camera, switch the
camera to registration mode.
@ Search condition also depends on "Network settings"
@ Delete camera information.
@ For this operation, please refer to the operating
manual for the Network camera.
@ Disconnect to camera.
"Disconnected" will be displayed in "Status".
@ Set to default use.
Displayed "(Default)" next to camera name.
(Available only when reconnecting)
Connect to Camera. "Connect" will be displayed in
"Status".
Select "Software update" _ Press OK to start the Software update screen
_3) Follow directions on the screen
@ Set "Clock" first. (p. 15)
-@_OK
42
r.
tc_L32_x30_en_Oo92.indb 42 2011/01/05 11:22:3{
I